Hitachi 43UWX10B 43" Rear Projection Television Logo

Related Topics:

mike Posted on Aug 06, 2017

Power issue? my tv will not power on at all. it was on we left the room and when we came back the tv was off (red light was on) tried to power on, cut power tried again, to no avail. removed back panel and looked around, found the deflection board has a led dp23 not illuminating when powered up. when i plug the tv in you can hear the "click" red power light comes on but no picture or sound. any ideas?

2 Related Answers

Anonymous

  • 3587 Answers
  • Posted on Mar 29, 2008

SOURCE: Hitachi 43UWX10B No Picture No Sound

hmmm...well...you have diagnostic tools

Ad

Anonymous

  • 927 Answers
  • Posted on Sep 01, 2008

SOURCE: DP23 LED not lit on deflection board no picture on tv

Good Day, Gil;
Your problem is in deflection circuit (115+v) check these: FP05, DP15, Q777, QH01, TH01, T701, etc. BUT suspect C707 1k pfd, 2kv, and check all the pico fuses (brown) 2" to the right of cap. Good Luck, big IRISH.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Sony bravia kdl55hx729 3d led tv turns on 3 seconds shows picture than four red flashes

Hello,
the error light sequence that you are seeing is indicating a "backlight error". Most likely you have a bad inverter board -the board that powers up the back-lights behind the display panel. They might be available via ebay if you are a DIYer, or you need to call for sony service.
Good Luck!
Rich Lilja
0helpful
1answer

RED Light Flashs 10 times

I will need the model number of your set in order to properly assist you with the issue
0helpful
1answer
0helpful
1answer

Powerlight comes on then red light blinks four times and no power. This is the worst tv I have ever owned. I have had to replace bulb once a year and clean fan it has yellow and green tinge say my non...

I'm sorry for the difficulties you're experiencing as the red light blinks four times and there is no power on the TV. Please follow the below troubleshooting steps and check the operation:

  1. Please make sure that the connections are secure.
  2. Let's try connecting the TV to a different wall outlet.
  3. Try resetting the TV. To perform the power resetting, unplug the TV from wall outlet for more than 2 minutes and then reconnect it.

If the issue persists, we can confirm that the issue is with the internal malfunction. I understand that the standby light is blinking 4 times in red. It indicates that the vertical deflection stopped. The possible cause of the issue is the failure of IC8001 in G Board. Also check whether the fan is working. I'm providing the service Manual for your reference. Please click here to download the service manual of the TV.

Note: It would be good if you can perform the above IC replacement with the help of a service technical to avoid safety issues. I only recommend you to perform it if you have hands-on experiencing in board level troubleshooting.

Thanks for understanding. Please let me know if you require any clarifications.
0helpful
1answer

We have been having problems with my Protron

Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.
0helpful
1answer

This just happened to our TV as well. TV was working, we left the room for a few minutes, and when we came back it was off and we couldn't get it to come back on. Green light flashes for several minutes...

try unplugging the tv for a few minutes and see if that does it. if not sometimes there is a reset button on the back. there could be dust inside the back cover that is also shorting out...last resort though. Good luck1
1helpful
1answer

SAMSUNG LCD TV WON'T TURN ON

Probably the inverter board is faulty. Thats the board that drives the fluorescent back light tubes. Not an easy fix
0helpful
1answer

Television will not come on. Power light flashing red.

Hello Debbie ok the problem that your tv set is having is coming from the convergence board which is faulty and has to be replaced, you can find one at partstore.com or by contacting the manufactuer of the tv set they should have one in stock, change out the board and you should be seeing tv in no time thank you hope this helps.
0helpful
3answers

Insignia lcd tv 32"

have good tec replace if nessary, The inverter module
Not finding what you are looking for?

70 views

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...