Jbl soundbar remote control code - JBL CS300.1 Subwoofer Mono Amp - 200W CS Series 300 Watts @ 2 ohms Car Audio Amplifier

Visit the following links for information. You can use the codes on hit and trial basis.
Sanyo Soundbar Remote Control Codes (directutor.com)

Sanyo Soundbar Remote Control Codes - Codes For Universal Remotes

Sanyo Soundbar Universal Remote Codes & Programming [2023] (remotecodesportal.com)

SONY Soundbar Remote Control Codes

https://codesforuniversalremotes.com > remote-control-...
A SONY soundbar can be controlled with any universal remote if you have the correct programming guide and the correct remote codes for the sound bar. If the ...

SONY Home Theater and Soundbar Remote Control Codes

https://www.directutor.com > content > sony-home-thea...
SONY Sound Bar 4 Digit Remote Control Codes: 4029 · SONY Sound Bar 5 Digit Remote Control Codes: 31759 · Using a Comcast Remote? Press AUX, Code 31759, and POWER ..

But no one buys Universal remotes these days, they are so 1980. Buy a copy remote the same as the original from www.remotes.com

..

Doing a DuckDuckgo.com search on, "Blackweb Sound bar bwa18sb001 remote code?" found: http://www.myblackwebremote.com/ - Use the section under, "To find your code, enter your device information:" and see if your sound bar is listed in this tool. WOW, interesting, I went through all options and no place does the Blackweb remote tool find ANY Blackweb sound Bars!? That's really bad! I guess it figures since Blackweb is a Wal-Mart brand?

You can contactBblackweb by email:
http://southerntelecom.mycusthelp.com/webapp/_rs/(S(me1nfskihiq5woyxalr44ng0))/RequestOpen.aspx?rqst=9&ST_BRAND=Blackweb&ST_Product=Universal%20Remote%20Controls%20-%20Blackweb&model_number=BWB17AV002

Your remote is listed there & you can then ask them why their tool doesn't even list Blackweb soundbars & what code should be used so your BlackWeb remote can control your BlackWeb SoundBar.

Good-Luck!

is it the remote not working or the receiver not receiving
take your remote and point the lens at the camera of your phone
turn the camera on and when you press the remote button ( any button ) you will see a white dot on the phone screen if it is working

Does the power light come on? If not, check the power cord and power outlet on the wall. Maybe plug in a table lamp to the wall power outlet to make sure the outlet is working. If the power light is on, check the Mute button on your JBL remote control. Also check the Mute button on your TV if sound and picture go through the TV first.
We had a Harman Kardon soundbar (model SB30) made by the same company as your JBL. It worked great for a few months. Then there were a couple of funny high-pitched sounds that stopped when we turned the soundbar off and back on. Then a day or two later we truned on the soundbar and it was completely dead - no sound at all. Harmon/JBL replaced the soundbar under warranty with a refurbished one which lasted about two weeks and dies the same as the first one. Finally, they replaced the second one with a higher model (the SB35) which is still working, although it occasionally makes a rapid clicking noise for a moment here & there.

2879,2880. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" view. It will make surf easier.
http://electrohelponline.blogspot.com/

Hi, you will need to access the operating manual for your directv remote. It will have codes in the remote. but most likely it will not work your soundbar as most Directv remotes do not have codes for them, and do not support them. You are stuck using the soundbar remote for your soundbar. The only option you can do is to purchase a learning remote from the store that can program to your directv box and your TV, and you can learn the volume keys to your Maxell sound bar.

see this . God bless you

There are no codes available for a 6.4 remote on a Vizio Soundbar. Below are the steps to Power Scan the remote control. This will search all codes 1 by 1 until it finds a code that works, or exhausts all available codes.


Power Scan:

1.) With the Soundbar on, press and hold the AUX mode button (about six seconds) on top of the remote until all mode button backlights come on, then release.

2.) Press 2 then press STAR (*)

3.) Press the Up arrow button once a second while pointing the remote at the Soundbar. If the code for the Soundbar comes up, it will power off.

4.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Tommy Faust
DISH Social Media Representative