20 Most Recent Intermatic Inc. ST01C Digital In-Wall Timer - Page 7 Questions & Answers

Utilitec 0192773 replaces single-pole switch and will not work for 3-way applications.

Open following link for clear wiring and programming steps for Utilitec 0192773
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

Utilitec can also be tricky to program if you are setting up astro dawn-dusk function.

For others finding this thread, same wiring applies to in-wall programmable timers by GE, Woods, Swilight, Sylvania, Tork, Hagar, UPM, Leviton, Grasslin, Wattstopper, Westek, and Intermatic analog timers. Intermatic battery-operated, Brinks and Aube timers are wired differently since they also work for 3-way applications.

Just to let you know any levito timmer swith will work for you situation. Just go to your local hardware store to get one.

If display shows, and timer turns lights on-off with manual override, then timer is wired correctly, and battery is good.
If timer will not turn ON at scheduled time, but turns OFF correctly, then best suspect is the programming.
Open following link for ST01C programming steps.
http://waterheatertimer.org/ST01C-program.html

Program1 is ON
Program2 is OFF
Program3 is ON
Program4 is OFF, etc

Review your schedule: Press Mode button until PGM starts flashing, and then press ON-OFF button until 01 starts flashing.
If Program1 cannot be set for some reason, then set your ON schedule on Program3 and ignore Program1. The timer does not mind if you have OFF set on Program2 and ON set on Program3 or Program5 or Program7 etc.

If you have multiple programs, for example different ON-OFF times for each day, then check for scheduling conflicts that will cause timer not to function as expected.

If timer is defective, contact seller about 1-year warranty.

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Sounds like the ON tripper is worn down.
Check that dial is rotating correctly each 24-hours. If not then wiring might be wrong.
Open following links for troubleshoot:
http://waterheatertimer.org/How-to-troubleshoot-Intermatic-timer.html
http://waterheatertimer.org/How-to-wire-T104-Intermatic-timer.html

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

It sounds like this third wire is supplying power to the switch it is going to. If that is the case then you need to isolate which wire in your switch box is the power coming in and tie them together . It is probably tied on to that screw because it was added on, possibly.

Open following link to identify timer and possibly download a manual, depending on which timer brand you have. Most in-wall timers on the market today are shown.
http://waterheatertimer.org/ST01C-program.html

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

1) Replace CR2 battery
2) Reset timer is suggested as last step troubleshoot

Reset instructions and ez programming and battery information on following link:
http://waterheatertimer.org/ST01C-program.html

if functionality will nto restore, then buy another timer.
For dawn-dusk, replace timer with Aube, Utilitec, or Sylvania

Add a comment for more help

Upvote the help.
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

I wrote a page on the Utilitec 0192773
It shows how to wire the timer and shows the manual larger.
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

Timer-green wire connects to bare ground wire.
Here's what to do Switch has 2 wires.
1) Take switch wires and connect them to timer-black-wire and timer-red-wire. Choose either one for now.
2) In back of electric box are white wires twisted together and covered with wire nut. These are the neutral wires. Connect timer-white to these wires.
3) If electric box does not have white neutral wires described above, then connect timer-white to bare ground.
4) Turn on electricity, and push ON-OFF button. If lights come on, timer is wired correctly. If lights do not come on, then reverse timer-red and timer-black wires.

I think Utilitec LW60419 is sold at Lowes as item # 0192773
Manual

The display is powered by 2 LR44 batteries.
http://waterheatertimer.org/Flipdown.html#LR44

Replace batteries and then reset current time and day.
Programs should remain without needing to be reprogrammed.

If battery does not restore function of display, try resetting timer.
Once timer is reset, programs are deleted.

If reset does not work, then replace timer.
EJ500 comes with 1 year limited warranty.

Absolutely feel obligated to upvote the help.
Or take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Utilitec 0192773 is also listed as LW60419
1) Has optional daylight savings plus dawn to dusk programming
2) Electrical wiring must be connected in order to program timer. This is because timer is powered by electric circuit (instead of battery).
3) Program choices:
-Individual days MO TU WE etc
-All 7 days of week
-Weekdays
-Weekends


4) Large manual + wiring tips:images load slow with dial-up
http://waterheatertimer.org/Program-wire-Utilitec-0192773.html


5) Enlarged manual
-Click on image to enlarge
-For more size, hold down Ctrl key on keyboard and use scroll-wheel on mouse

The reason there is 2 black in the wall is because a standard line breaking switch was used. Meaning the hot side of the light was the black wire once broken light goes off. You would hook the black from switch to black in wall and white from switch to other black in wall green is ground and red put wire nut on. Red is for a 2 switch system. Where one of two switches in same room controls same light. Its not needed. Take caution when doing this trun light on goto breaker box and flip breakers till you find the right one that powers that light. once lights off then do your thing replacing.

Hi there,

Well you may follow the link below to get the manual -

http://www.intermatic.com/products/timers/consumer%20indoor%20timers/in-wall%20timers/st01c.aspx

Good Luck!!

Thanks for using FixYa!!

Open following link for ez programming steps plus illustrations, and link to manual and wiring diagrams.
http://waterheatertimer.org/ST01C-program.html

If resetting timer does not restore functionality, and timer has power, and you checked that LIGHT BULB is good, then timer has gone bad.
To double-check circuit, replace timer with ordinary on-off switch and see if it works.
Warranty: buy new 0192773 timer at Lowes, and return broken one inside new package.

http://waterheatertimer.org/Program-wire-Utilitec-0192773.html

ST01C manual
http://waterheatertimer.org/Intermatic-st01c.pdf

Utilitec does not make a 2 speed timer.
http://waterheatertimer.org/Program-wire-Utilitech-LW60419.html

1) One possible option is a timer with NO and NC terminals like Intermatic-Grasslin FM1 series rated 1 HP. This example timer would have the motor running continually on either one speed or the other.
http://www.intermatic.com/~/media/files/intermatic/products/instructions/grasslin/fm1%20series%20time%20switches.ashx

2) Inside a 2-speed motor are two separate windings.
Windings are loops of copper wire that cause the fan motor to rotate.
For 2-speed, each winding has to be connected to a different 'switch.'
For example, like a ceiling fan. You pull the chain once, and electricity flows to one winding. Pull the chain again, and the switch sends electricity to another winding.

3) The following wiring diagram shows ordinary on-off timer connected to 2-speed switch: This is the basic plan for Broan Nutone 2-speed switch timer, which might be the product you are replacing
http://blog.airscapefans.com/wp-content/uploads//timer_option1_1-1024x768.jpg

4) Nutone makes a 2-speed whole house fan timer.
http://www.nutone.com/PDF/InstallGuides/CFS2WHins89777.pdf

5) And open following Broan Nutone manual that show the two spped timer wiring
http://www.nutone.com/PDF/InstallGuides/CFS2ins57169.pdf

Utilitec timer: manuals and instructions for in-wall programmable

Utilitec LW60418 - Lowes 0141224

Utilitec LW60419 - Lowes 0192773

1) I tested this timer and read pdf on battery specs:
20-30 days is battery life for CR2 ST01C battery
http://waterheatertimer.org/ST01C-program.html#battery

2) In addition, Fixya customers report needing to change battery frequently when timer is located in garage.
The same is true for Aube timers since timer display is dependent on rechargeable battery.
I have not tested every timer, but it seems in-wall timers that are used for 3-way switching have this problem.

3) If your garage timer is not 3-way, where more than 1 switch controls same light, then buy single pole timer and replace Intermatic.
For example GE 15086 & 15071, Woods 59018 & 59028, Tork SS720 (which is GE), Utilitec 014224

4) If you need astronomic dawn-dusk timer that is single-pole and not battery operated, then buy Utilitec 0192773 - LW60419 at Lowes.
Link below gives manual and wiring, both are tricky judging by number of fixya requests.
http://waterheatertimer.org/Program-wire-Utilitec-LW60419.html

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

No, Utilitec LW60418 timer is not made for astronomic dusk-to-dawn operation.

However Utilitec LW60419 / 0192773 is made for astronomic operation.
Following link shows timer, manual, and wiring instructions:
http://waterheatertimer.org/Program-wire-Utilitec-LW60419.html

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, expert speaks with you over phone while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.