20 Most Recent
Kodak EASYSHARE G610 Thermal Printer - Page 2 Questions & Answers
My Kodak G610 printer dock. I can't get the driver
Dont worry on that you can download your software and drivers and also the firmware of your g610., Just visit this website
kodak.com/go/G610support Now you can just click download software and firmware. for you to see the link of the drivers and firmware
I have a kodak g610 printer dock and the paper is
-Try to Unplug power cable for 10secs
-Remove paper try from the printer
-Make sure you are using the extralife paper or the thermal paper that came from the cartridge
-before you put the paper tray on the printer clean first all the rollers of the printer using a clean cloth
-Now if your done put it back now the paper tray
-Plug the power cable back
-Then do a test print.
If these solutions did not solve the issue please call kodak toll free 1 800 235 6325 and have it repair. GudlucK
Computer can't find driver to communicate with printer
can you check if you have the CD that came along with the Kodak Printer? You would need that to install the printer on your computer. Once thats done, you should be able to print the pics
Hope this helps
Thanks
Ranjit
Doesnt collect paper
Make sure you are using Thermal Paper for printer docks
if problem still persist
call the technical support thru this number 1800 235 6325
Hope this will help
Regards
Byron
Its trying to print but the image is very faint
try checking the configuration of your printer. and check if the ink is ok. Do a maintenance task in your printer in order to clean smudges and other things that may cause your printer to perform properly. Theres no problem with the software, but only configuration..Or your device may be not doing very well because of over use... Pm me if you still need help. Thank you
Printer says wrong paper
hi annette.. when you print a photo pls try first to check the properties maybe the paper settings are not fit on the paper pack you said... thank you...
Kodak ESP3 wont print, how do i put paper in
It isn't fixed yet, I have spoken to the shop I bought it from and I have got to take it back in for an exchange printer, they think it must be a manufacturing fault. Thank you for your help, how will I let you know if it works?
Kodak G610 printer dock won's communicate with computer
You know I had this same problem for a while as well. The only solution I found was that I HAD to use the Kodak Easyshare software in order to print anything with it. (That was the case with my XP desktop and my Mac laptop...). But sometimes it still would not spool properly and would require unplugging the printer and plugging it back in to reset.
Help with my Kodak EasyShare G610 printer
Have you tried cleaning the paper feed rollers with a slightly damp, lint-free cloth? You'll have to remove the paper try first. If that doesn't work you may have to remove the ink cartridge and tighten the roller. I had to call the Kodak technical support to get help with this. Hope this helps.
Not finding what you are looking for?