20 Most Recent Jenn-Air JED8230 Electric Cooktop - Page 8 Questions & Answers

you dont recoat need to replace the part

they will be frozen from one of the cleaning products you use and there probably not the 2 you use all the time. get some CRC or WD40 and spray a little on the shafts so that the lubricant can run down into the top of the gas valve. you might have some rubber covers at the base of the gas shaft that you might have to manipulate to get the lubricant into the gas taps. give them a couple of sprays at a couple of 1-2 hour intervals. then see if you can start to get the shafts moving by pushing and pulling on them. once they start moving get some more spray on them. should come good.

my blower switch shorted out. Could smell the plastic once removed. Liquids dripped into contacts during cleaning. Switch replacement obsolete. Found switch @ Ace. Made modifucation to panel to accept rectangular switch.

You may need to turn the power/gas supply off until the problem is fixed.

Usually that's caused by clogged holes in the burners. I clean it out using a toothpick.

Call Jenn-Aire to have a technician troubleshoot your cook top on site. You will save time and aggravation whether your cook top is gas or electric, possibly wired improperly, etc,etc,etc.

Here's the exploded view of parts assembly: My SC8720EDW0 Model Overview from PartSelect ca