20 Most Recent Motorola Mobility Bluetooth Headset-Silver/Black Headset - Page 2 Questions & Answers

1. You need to press the call button while the boom is closed to get the head set to turn purple 2. Open the boom (reciever) to keep the pairing light on. 3. turn on your bluetooth on your computer and connect to it.
*** typically the password is 0000

Microphone wire is severed, probably the red one, needs to be soddered or repaired.

The speaker wire is severed. Not much help, I have the same problem and I'm trying to use a soddering iron to reattach the wires.

sure can
with the boom mic closed Push and hold the call button until the light around turns purple or stays a blue, then open the boom mic the color should stay on now go in to the phone settings and find the bluetooth settings and search for device once it finds it connecct to it, Remember the Passcode is 0000, and then you should be all set up.

Try 1111 or 1234.

Marco

You have the mute function turned on. See the book that came with it.

Re- set phone to factory settings. This will erase your memory.

Try the last four digits of your phone number.

hi have motorola h700 bluetooth device but i forget my passcode how do i reset it again i tried many passcode like 0000, 1234, 1111 ,2222, 3333,4444,5555,6666,7777,8888,9999, but its not connecting wat do i do nw.. plz solve my problem.... my email address is [email protected]

It has to be 0000 because no one can change it its set by motorola are you trying to pair with your phone?

Hold the mutifunction button with the mouth piece close, until it turn purple, then open the mouth piece so that it will stay in the pairing mode. Now go ahead and have your phone or blackberry search for H700c
Good luck

http://www.motorola.com/mdirect/manuals/QSG-H700_9499A88B.pdf

The head set just started to have low audio. People can hear what I am saying. I can't hear them.

How do I fix it?

Try 0000

1.Press and hold the Multifunction button in the middle of a boom headset while the headset is closed. The light will glow blue.2.Open the boom microphone and the blue light should remain on. If not, repeat step 1.
3.On the cell phone, press Menu > Settings > Connection > Bluetooth > Handsfree > New Device
4.Select H700 once a connection is detected.
5.The passkey "0000" is now entered to confirm the connection has been made.
6.The cell phone screen will now read "Bluetooth Connection".

Tips:
1.Provided you set the Bluetooth power to "On" after the initial connection has been made, the phone will automatically re-connect to the headset.
2.To set the Bluetooth power on - Press Menu, Select Settings, then Connections, then Bluetooth link, scroll to Setup and select that. Scroll to Power and chose Change. Scroll to On and press Select. The screen should now read "Changed: Power On".
3.Test Your Connection: Close the headset and watch for cell phone to say "Disconnected". Re-open the headset and the phone should be connected automatically and will now display "Bluetooth Connected".

please give good rating if the solution works.
Thanks for using FixYa.

Hi,

Check to see if you have not muted the headset or the phone.

The passcode for bluetooth headsets is 0000. Its a default setting.

im having a problem with my h700c and my lg too it was paired with a samsung and i got the lg now the phone phone the BT fine it just wont pair,wat can it be?

usually it's pretty simple, you have to turn the h700c on, usually it's by holding the button for few second untill you get the blue light on permanent for a few seconds, now go to your phone and look for the blutooth settings, now you should have an option find other devices. after your phone found the headset you'll have an option "connect" or "pair" or somthing from that kind.

And that's it

Hope this helps
don't forget to rate
All the best

Tom

Hi,

Thr default code should be four zeros: 0000

Have you tried a soft reset of the unit?

Try uninstall and install again the devices/