Motorola Mobility Bluetooth Headset-Silver/Black Headset - Answered Questions & Fixed issues

the default wifi passkey is usually printed on the label stuck to the router. you can login to the router using admin admin with a lan cable connected pc start a browser and enter 192.168.1.1 into a browser to get the menu up. you can then alter the wifi passkey value to whatever value you prefer. ALL Wifi signals have a PassKey by default so you must have entered it at some stage to the working devices.

Hi David Johnson The default password that some device required is (0000). Regards Marge Motorola Mobility

While bidding on an item the reserve price was lowered putting my max bid above it and good for the win but Ebay manipulated my bid and lowered it to below the new reserve and cost me the item. I complained and they told me it was for my protection they took the item away from me. They did not protect me I wanted the item. This seems to help the buyers who have no intention of buying the item just running the bid up. How can I get this resolved

I'm having the exact same problem!

User Guide (pdf) - UntitledThe instructions you need start on page 15

You can get the pairing for you device on the link below.

http://www.motorola.com/mdirect/manuals/QG-H700_9499A88O.pdf

Good Luck and please rate 4 thumbs up for the free answer

Hi,

The passkey is 0000 (four zeros)

For more details, download and refer to the manual in PDF format by clicking this link.

Please note: Adobe PDF Reader is required to view this manual. Click here to download the latest version of Adobe Reader.

Thanks for using FixYa.

Hi,

The numeric passkey is 0000 (four zeroes)

For more details, download the instruction manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF,
then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999

hi,
Please try the default pass code "0000". If it does not work, please reply to me! i will help you!

Yes, you can pair your iPhone with any bluetooth headset. I have used many different Plantronics headsets and all have worked perfectly.
On the iPhone, go to Settings (the gears icon), click GENERAL, then Bluetooth and make sure it's switched to "On". Then, follow the pairing instructions that come with the headset.

Enter the code 10 times false, then your phone will reset himself and let create new one.

Here's the instructions for your headset. http://bit.ly/bpXysh
You'll find all the information you need to pair it, etc.

It's in PDF format. If you need a PDF Reader to view the page, you can download Adobe Reader for free:

Adobe Reader: http://get.adobe.com/reader/

Yep it will work, but you cant have Auto Answer facility in iphone.....Hav Paired the same with my motorola headset

they control the volume and the call waiting.

Hi there - follow the step-by-step instructions here:
http://direct.motorola.com/eng/bluetoothselect.asp?country=GBR&am

Just pick your model and it will guide you through it;

1. You need to press the call button while the boom is closed to get the head set to turn purple 2. Open the boom (reciever) to keep the pairing light on. 3. turn on your bluetooth on your computer and connect to it.
*** typically the password is 0000

Microphone wire is severed, probably the red one, needs to be soddered or repaired.

The speaker wire is severed. Not much help, I have the same problem and I'm trying to use a soddering iron to reattach the wires.

normally it's 0000 on most of them