20 Most Recent Acer AT2001 20 in. EDTV-Ready LCD Television - Page 7 Questions & Answers

this model is no longer available in market anymore.and therefore no branded new parts available.
but my friend told that price of screen grew up last days,at least more than 40$.as my idea is you better try on new model.you can find screen from your electronic goods dealer and i recommonded buy new model.you may repair this,but in future,parts may not available of all.before you buy new one,think twice is this model suitable for future,and how many years.
Thanks
i think this may help,if yes please accept,or not and ifyou need more,contact me again.
good luck

Hi


Thanks for using FixYa. Hope you already know that this cannot be corrected through the MENU options. To resolve this issue you’ll have to open the back of the unit and check the inverter board which is the power supply source for the backlights. The issue can be a bad inverter board and/or the inverter board is not getting 20vdc from the power supply maybe due to the connector that has gone bad/loose.All this is only recommended to be done by someone who has electrical expertise and knows about the internal circuitry of the unit. Please do accept the solution if the issue is resolved or post a comment for further assistance.


Thanks
Rylee

You have a bad oscilater. Please have tech replace

Power supply. Try replacing it. It is modular.

I have had the exact same problem. After doing some research, I learned that previous to the DTV transition, several television stations broadcasted in the VHF band. A VHF signal had more of an ability to travel around trees and mountains and, therefore, was received easily by television antennas. However, after the DTV transition, many stations moved to the UHF band which is "terrain limited," meaning it can't go around trees, mountains, etc. So, if you live near a large hill or have lots of trees nearby, you may lose a signal. Unfortunately, there is not much you can do about this. If you originally used "bunny ears" or another type of indoor antenna, you can improve your reception with a rooftop antenna. If you already have one and still don't get all the stations you used to (like me), then there isn't anything you can do except maybe making your antenna taller. I suggest you contact a professional that works with antennas and ask him what he may be able to do. I wish you the best of luck! Sincerely, Der Strom

That depends on the type of your card reader: if when you connect it to the laptop you only get a single drive letter assigned to it (not as many letters as there are sockets), than no, you can only use a single card at a time.

If it has to be round rather than a standard pc/monitor power cable, your best bet is going to be contacting the manfacturer. You might find a replacement at some place like radio shack or a local computer store but from the sound of it, it's not going to be something carried by many places if any.

http://www.geeks.com/details.asp?invtid=API-652&cat=CCD

something similar?

hauppauge

video settings (usually on advanced settings or secondary display tab) will have a selection to output to hdmi plus selections suitable for various televisons

are you trying to connect wireless or cabled?
Wireless should be easy, just turn on the wireless device (if its built in) normally by pressing a Fn key and an F key marked with an antenna picture. Then connect to you Sky router after the wireless scan (the number and network key are printed on your router base)
You should just be able to plug an RJ45 network lead into your laptop and it should use DCHP to work (Plug and play).

I brought it to the shop

I do not know what version sky remote you have but I'm not sure it matters. I could not find any codes for your Atec TV anywhere. Chances are it's a new manufacturer possibly a home brand. This is a brand sold manly in a localized area. But because of the web it allows it's sale anywhere.
The first link is to Sky.com help. The second is basically telling you if your TV isn't listed give them time.
I will ad that I have seen some issues with the picture of Atec TV's not being properly display when used with the Sky system.
Sorry I couldn't be of more help. I will keep an eye out for update regarding your remote and TV. If one pops up I'll post it to this thread.
"HAPPY (insert preference here)" and "MERRY NEW YEAR" To you and yours.



http://www.sky.com/portal/site/skycom/skyhelpcentre/producthelp?nodeId=73a6e9e0-0ade-4eed-810b-cec670799bcc&articleId=11320303


http://www.sky.com/portal/site/skycom/skyhelpcentre/producthelp?nodeId=73a6e9e0-0ade-4eed-810b-cec670799bcc&articleId=5111510

The only thing i've seen with those Acers that generally cause that is that electrolytic capacitors in the power supply fail causing what you're describing. It would make sense that 3 TVs bought at the same time would have about the same amount of time on them, and are wearing at a similar rate.
Good luck.