Panasonic PV-GS300 Mini DV Digital Camcorder - Page 9 - Answered Questions & Fixed issues
NV-R50 refuses to eject
This series uses several surface mount flexible cable connectors, the actual socket lifts from pcb and needs to be resoldered, 3 on main pcb and one onservo/drive pcb which is most likely, but due to its age, maybe other problems also, hard to say
The camera won't do anything at all.
The power sector on this main board has failed. you will need a total board transplant in this case.
replacing the central core(main board) will fix this issue.
Panasonic LCD now working
flexible printed ribbon cable through hinge is bad. order new hinge assembly and replace it. difficulty level of 7.
I need software for panasonic sdr-85 to load video on mac
go to Panasonic USA. then go to their support page and type in your model number. there are several sdr-85's put you need to be specific. Pick on the get support for that model and it well open a window showing your model. pick the top right tab. for software and downloads it will then give you a choice of a windows or mac software download. Its free.
CAMERA SHOWS THIS CARD CANNOT RECORD IN VIDEO MODE. HOW DO I FIX IT?
I see two possibilities. Fortunately they have the same solution.What type and speed memory card are you trying to use? Is the card compatible with the camcorder? Since you didn't specify the model of your camcorder I can't tell you what type of card you need to use, but if the camcorder is designed to use SD cards and you're trying to use an SDHC card then it won't work.The second possibility is that your card isn't fast enough to record video. There's a lot of data involved in a video clip, and not all memory cards are fast enough to handle it. The situation is much worse with HD video. Again, without knowing the model of your camera I can't tell you how fast a memory card you need.
Not finding what you are looking for?