Top 20
Microsoft Wireless Optical Desktop Pro Keyboard Questions & Answers
PrtScn/sysRq button not working. suggestions?
In Windows, the print screen key actually transfers a copy of what ever you have on your screen to the "scratch pad" of your machine, then you can transfer that copy to an internal program such as "Word" (If you have Word Installed") You will not see anything until you transfer, by getting up the program, and then hitting the key Ctrl+V or going to Edit up in the left corner of the program, and selecting "Paste"
1/20/2011 2:06:42 PM •
Microsoft...
•
296 views • 0 helpful votes
How do I find out
Try the F Lock key on many models its a dual function key,although IMO thats so lame especially if your trying to boot a nuked computer and want to go into safe mode or other options.
Miklo
1/27/2011 5:19:04 PM •
Microsoft...
•
61 views • 0 helpful votes
Wireless 1000 keyboard not supporting standard Windows F-keys
I had the same problem. I just could not get the "Alt-F4" function to work in a macro.
In the Macro Editor, in the lower center, you will see the "Z" actions. I realized I wanted the "Press and hold Z" function.
To get this, use "Inserting Special..." function to insert the Alt key stroke in the macro.
Then highlight the Alt in the Editor. Right Click and select "Split."
This will put the "Press and hold Z key" and "Release Z key" icons in the Editor.
What you want is the "Press and hold" function. Delete any other references the the Alt key.
Then enter the F4 key, and there you have it.
Hope this all makes sense to you.
3/25/2009 5:20:14 AM •
Microsoft...
•
532 views • 0 helpful votes
Keyboard is not working
Normal
0
Assuming
that you have good batteries installed, turn the Keyboard over and locate the
small reset/connect button on the back of the keyboard and press it. Then
try to see if it is working. If not try pressing the button on the
receiver and then on the keyboard. Try typing, should work okay.
Hope
this helps. Bud
10/21/2008 1:57:24 PM •
Microsoft...
•
404 views • 1 helpful votes
Keyboard
Unless you have the patience and know-how to tear it apart and clean it all up I would say you would save a lot of money on aspirin by getting a new one. Almost every one I've seen taken apart for something like this ends up with loose keycovers which sometimes jam against each other and do not allow the key to actually strike the sensor so spell-checker is a constant companion with them.
11/13/2008 1:03:52 PM •
Microsoft...
•
143 views • 0 helpful votes
Ms wireless 5000 mouse
If you use Vista click Start, Programs, Accessories, Ease of Access, then Magnifier. You should be able to find the Disable from there.
6/20/2008 4:54:59 PM •
Microsoft...
•
68 views • 0 helpful votes
"Assign keys" Dialog Box.
Hello,
What I would suggest is reinstalling the keyboard software from Microsoft. This is better than resettnig the defaults as it will mend any issues the keyboard software is causing, which is probably the case. When you go to Control Panel and uninstall the keyboard software. that is to say you do this once you have the CD or have downloaded the latest software version from micosoft.com/downloads You may find that when you click on the keyboard software to uninstall it in Add Remove that there is another option titled Repair, if so, choose that and let the OS repair the installation.
Kind Regards,
Worldvet
5/28/2008 11:09:04 PM •
Microsoft...
•
94 views • 0 helpful votes
Keyboard
then maybe you need to pop out all the keys that are not on the right place... (for me it's not fun =)
here's the layout... http://en.wikipedia.org/wiki/Image:Qwerty.svg
and http://www.logicapproach.com/images/0J4628.jpg
you can also just buy a keyboard if you don't want to do that
6/5/2008 11:31:59 AM •
Microsoft...
•
56 views • 0 helpful votes
Wirelees laser 5000 mouse
Hit the long gray button on the right side of the mouse once. That will remove the magnification.
1/26/2008 2:26:32 PM •
Microsoft...
•
94 views • 0 helpful votes
The Print key is not working
it depends what system you are running cetain programs and windows operating systems dont accept this shortcut
try going into controll panel clik keyboard and make sure hot keys are on
the only other reason is if you have eny other wireless functions running these can disrupt the signal from the keyboard to the computer turn off all wireless items and try agen
if none of these work try replacing the keyboard as it should work as long as hotkeys are on and the operating system you have accepts this function
10/18/2007 12:25:58 PM •
Microsoft...
•
251 views • 0 helpful votes
Lost a Word font on my Mac and I can't get it back.
If you have already tried the common troubleshooting steps with no success, here are a few additional suggestions:
- Clear font caches: Font caches can sometimes cause issues with font recognition. To clear them, follow these steps:
- Close all applications, including Word.
- In Finder, press Command+Shift+G, then enter "~/Library/Caches" and click Go.
- Locate the "com.apple.ATS" folder and move it to the trash.
- Restart your Mac and check if the font now appears in Word.
- Check if the font is disabled in Font Book: Sometimes, a font may be disabled in Font Book, which can cause it to not appear in certain applications. To check and enable the font if needed:
- Open Font Book (you can search for it using Spotlight).
- Locate the font in question and ensure it is enabled (unchecked fonts won't appear in applications).
- If it is disabled, check the box next to it to enable it.
- Repair disk permissions: Although less likely to resolve font issues, repairing disk permissions might help in some cases. Here's how to do it:
- Open Disk Utility (you can search for it using Spotlight).
- Select your main disk (usually named Macintosh HD) from the list on the left.
- Click on the First Aid tab, then click the "Repair Disk Permissions" button.
- Wait for the process to complete, then restart your Mac and check if the font is now visible in Word.
- Create a new user account: In some instances, font-related problems can be specific to a user account. Creating a new user account and testing the font in Word under that account can help identify whether the issue is related to your current account.
If none of the above solutions work, you might need to seek further assistance from Microsoft support or Apple support, as the problem could be related to a software conflict or compatibility issue.
7/31/2023 6:37:35 PM •
Microsoft...
•
37 views • 0 helpful votes
Where is the pairing button on Microsoft wireless keyboard 6000 v3.0 or does it need a USB plug
The Microsoft Wireless Keyboard 6000 v3.0 comes with a USB transceiver that you need to plug into your computer's USB port to connect the keyboard to your computer. The keyboard and the transceiver are pre-paired from the factory, so you don't need to pair them again unless you replace the transceiver or the keyboard.
If you do need to pair the keyboard and the transceiver again, you can follow these steps:
1. Insert the USB transceiver into your computer's USB port.
2. Turn on the keyboard.
3. Press and hold the "Connect" button on the underside of the keyboard for a few seconds until the green light on the transceiver starts flashing.
4. Press the "Connect" button on the USB transceiver.
5. The green light on the transceiver should stop flashing and stay on, indicating that the keyboard and the transceiver are now paired.
Note that there is no separate pairing button on the Microsoft Wireless Keyboard 6000 v3.0 itself.
hope it would be of use to you
6/19/2023 8:00:10 PM •
Microsoft...
•
46 views • 0 helpful votes
How do I fix my computer?
Download a fresh copy of MS Edge, or better still, Google Chrome. Edge is very basic and not user friendly. You don't mention the computer make and model and what the original operating system was and what you have on it now. Depending on the age of the computer and what OS you had on it, there have been huge patches and service updates that have basically given uses a new operating system via 'update' downloads. If you had an early version when Edge was new, it was very buggy.
Google Chrome - Download the Fast, Secure Browser from ...
Google
https://www.google.com > intl > en_ca > chrome
Google Chrome logo. Chrome is a fast, secure, free web browser. There's no place like Chrome. Download Chrome.
Install Chrome offline · Download the installation file. · Open the ...
Microsoft Edge
Microsoft
https://www.microsoft.com > en-us > edge
Microsoft Edge helps you browse without skipping a beat. Built-in features like Collections, vertical tabs, and tab groups help you stay organized and achieve ...
Using Windows Server? Download Microsoft Edge here. Microsoft ...
3/18/2023 10:30:03 PM •
Microsoft...
•
250 views • 2 helpful votes
Not finding what you are looking for?