20 Most Recent
D-Link AirPlus DI-524 Wireless Router - Page 8 Questions & Answers
Where i can find the
Here is the link for the manualhttp://www.dlink.com/products/?tab=3&pid=DI-524&rev=DI-524Please rate my answer, Thanks
Hello, i have a D-link wireless router 802.11g/2.4
Hi there,
By reset I am assuming that you mean you've pressed the reset button on the back of the router for 30 seconds to return it to manufacturer's state?
If this is so, and you're still getting the same problem, You need a new router.
Sorry for the bad news, but routers only last for so long. ESPECIALLY D-link.
I plug it in and there is no power the light is
Hi stella_bella,
I see that your D-link Router will not turn on or power up as you mentioned.
If I may ask Have you tried a different power source / Outlet?
also try ti find a different adapter with the same wattage on it and see if the Router will power ON using a different Power Adapter.
When did you notice your D-link not powering ON? was there any power surges lately, that can cause Router or Modem to get busted or damaged if ever you were either online or if the Router was turned on during the power surge.
The only thing you can basically do is try a different Power outlet or power source and a different Power Adapter of the same wattage to avoid damaging the Router more.
I hop that this helps.
Have a nice day,
mvincentc
Cannot get into the web
Hi there,
first of all, I take it your getting to the login page? if not I will explain how to do that after this. If your on the page, the default username is admin and a blank password or username is user and no password. If these dont work then the defaults must have been changed at some point. To sort this you will need to reset the router, use the defaults and set it all up again.
If you cant get to the router page at all then what you need to do is connect to the router with a cable, wait til your computer gets a connection and go to control panel->network connections (XP) or control panel->network and sharing centre->advanced network settings (vista/7) then right click on the connected adapter and select "status" in the next box which appears select details and you will get a window which shows all of the settings of the network connection. The one you are looking for is the default gateway (it should be something like 192.168.0.1) If the area is blank then you are not getting an ip address from your router so a reset may be your best route) Open up your internet browser and type this address into the address bar (not the search box) and press enter, you should be presented with your routers webpage.
Hope this was some help.
When I log on LAN
It may not be the router, but rather the internet itself, There have been major slowdowns, lately.....One thing to try is to change the router channel to 11, as the default channel cinflicts with cordless land line phones, even 3/4 miles away....
How do i make the
All
you have to do is connect to the router and secure
the connection follow the following steps: -
First
you have to access the router through web browser (Internet Explorer)
by typing the IP address of your router in the address bar, which is
192.168.0.1 (Default router settings are written under the router) (unless you've configured otherwise, the default username is admin and the password "leave it blank") and lookup for the options to do the
following: -
1. Change the SSID (Name) of the router
2. Change the default administrative user name and password
(The above step would prevent unauthorized access to your router)
Next step is to secure it:
1.On the left-hand side, under Setup, click "Wireless Setup"
2.Under "Wireless Security Mode", select your desired encryption method (preferably WPA2-PSK)
3.Choose a Network Key - it can be anything, as long as it's 8-63 characters in length
4. Click Save Settings.
Now your router and your connection would become secure and the user has to provide the network key to access the internet.
Please, refer here
to download the product guide/manual and make configurations as per the
details provided by your Internet Service Provider (ISP).Let me know if any further clarification/ assistance is required.
Hope it helps! Good Luck!
CreativeTECH
I have set up the D-link DI524 router and it
If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ON
until the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, open
the browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the default password.
You can now configure the wireless settings.
Now configure the wireless card in your computer/laptop with
the router's wireless settings.
To secure your wireless network from unauthorized access,
please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
How do i fiure out what my network key is. Its all
In order to get your router back to the original settings, you must push
in the reset button (usually on the back of the router) for somewhere
between 10 and 30 seconds depending on the router. You may need a pin or
something small to push in the button, because it can be recessed. Once
you have reset the router, the username and password will be changed to
the defaults, admin and password, respectively. One thing you must
remember is that resetting the router will change all of the router
settings back to the factory settings. This means you will lose all of
the changes you made since you got the router. Make sure to write down
any things you've changed, so you can change them back after the reset.
Also, I recommend updating to the latest firmware after the reset.
If you need more help post back!
Thumbs and testimonial are welcome!
I Cannot log on on
If you cannot log in to your router because you forgot the password for it the only thing that you can here now is to do a reset on the router.
To reset the router you need to press and hold the reset button of it for 15 seconds while power is ON and then after doing that unplug and replug the power of the router and it should now be back to its default settings with default password.
Can not renew my IP
Try resetting the D-Link back to the default settings and configure it again.
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the default password.
You can now configure the wireless settings.
Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Cannot connect my laptop to
Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the default password.
You can now configure the wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
My DI-524 router was working
Have you tried RESETTING the D-Link back to the default settings?
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the default password.
You can now configure the wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Trying to hook up my
If the default password has been changed then -
To reset the D-Link back to the default settings -
Press and hold the RESET button at the back of the router with the power ONuntil the LEDs flash at the time the release the RESET button.
Connect a LAN cable from the D-Link to your laptop/computer's LAN port, openthe browser on your laptop/computer and enter the D-Link's configuration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter)
You can now change the default password.
You can now configure the wireless settings (ie the security settings).
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Passord:admin
the username is admin and the password you leave blank unless you changed
Not finding what you are looking for?