Top 10 D-Link AirPlus DI-524 Wireless Router Questions & Answers

hi
just had same prob if you go to dlink site in phillipines there you will find the latest firmware for dlink 524 . i couldnt belive i had to do this as all links to uk site had no pages diplayed .i went first to .singapore site then to australia but the most uptodate firmware i found was on phillipines site

ver2.06b02

Hi, To enter the webinterface configuration of your D-Link 524, type "192.168.0.1" at the address bar of any browser. UserName is "admin" and password - leave blank. Good luck and kind regards.

if you go to start then run and then type in that box cmd this will take you to DOS. Type in there ipconfig It the default gateway is not the same as the 192.168.0.1 then you have to type into your address bar the new IP address. I hope this solves your problem

-Connect your router to the wall and connect your laptop to the router using a cable.
-Use Internet Explorer and type the following line in the address bar: http://192.168.0.1
-You should see a Username and Password Screen...type admin for the username and leave the password blank, unless of course you did give it a password.
-Next you should see the D-Link setup page with tabs across the top that say Home - Advanced-Tools-Status-Help
-Click on the WAN button on the left side of the screen
-Now you should see the WAN Settings Screen
-Click on "Dynamic IP Address" (You should not use PPPoE)
-Click on the Apply button at the bottom of the screen.
-Now close your browswer and restart your computer.
-You should now be able to access the Internet...through the router cable and wireless
-Let me know if you need more help with any of these steps.
-Good luck...and I hope this helps!!

Hello,

You can find donwload here:

http://support.dlink.com/products/revision.asp

follow the instruction.

me this help,

melnavz

PS:
pls do not rate me if my solution not solve the issue and you need more further information. but if is invaluable solution rate me fixya.

If you don't know your pre shared key or forgotten it. You need to access the configuration page of your router and create a new network name and a sign a new network key or pre shared key. Create the profile of your SSID/Wireless network connetion under wireless settings.

go in the web interfae for your router.. to find it click start then run.. in there type cmd... in the new window type ipconfig... look for the line default gateway will look like 192.168.2.2... type that number in a web browser address bar ... the web interface will be on your screen.. to black a web site go in url filtering add the site address.. save the settings ..

Go to the following website to download the firmware update for the DL-524. This will save the firmware update to your harddrive:

http://www.dlink.com.au/tech/Download/download.aspx?product=DI-524&revision=REV_B&filetype=Firmware

1. Open the web browser
2. Type in the IP address of the DL-524 router.
3. Type admin in the user name field
4. Type the password you set on this device
5. Click on the Tools tab
6. Click the browse button and locate the firmware file you downloaded and saved to your hard drive.
7. Click the apply button to complete the firmware upgrade.

The D-Link's configuration IP address is 192.168.0.1
Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Hi!

The wizard (link below) will get your wireless up and running in just a few minutes.

Hope this is helpful.
-Steve


DI 524

DI 524

support.dlink.com