20 Most Recent
Sony VPL CS5 Multimedia Projector - Page 3 Questions & Answers
Sony CS5 Wont turn on
the cover switch is probably not fully made.
Ensure that the cover tangs are pushing the pin
on the miniswitches.
Try putting slight pressure on the fan or lamp cover to see if the lamp/cover light
stops flashing.
you will need to do a restart on the PJ to check this out
YELLOW SPOT ON SCREEN
There may be a dust fleck on one of the LCD screens inside your projector. I had a similar problem and managed to clean it. But it requires you to dissassemble the entire projector !!!. If you are not technical, don't do this yourself. !!!
It just wont turn on
Hi,
Pls open the Lamp unit and check it if it is giving the power indication on the panel.
Viren
Sony VPL-CS5 menu will not display
Give input signal to the projector and see that if the menu appears or not on the screen.
if menu comes on the screen then put the backgroung color to blue, instaed of black.
if nothing comes on the screen, then the LCD panels are faulty.
Viren
RAVE SERVICES
Lamp time resetting
HI
Not sure if its in the handbook but you can download a copy from here
http://safemanuals.com/user-guide-instructions-owner-manual/SONY/VPL-CS5-_E
Sony VPL-CS5
ive got the same problem if showing a white background. i can see parts that are a bit purple...
when i got a new lamp today the problem is not as intense anymore. when i looked at the lamp i was able to see some dirt that had been burned into the glas in front of the bulb. it had approximately the same color. since i just bought a bulb and installed it into the case of the first lamp, which doesnt have that color burned into the glas, the problem is way smaller than before.
im not sure if thats the reason - but might be a solution...
Replaced Lamp and warning is still on screen
This work´d great
the "please replace the lamp" text disappeared but the lamp timer is still on the same, but i am still satisfied that the big red text on the screen is gone :P
/Newton from Sweden
Lamp change
You have to go to the settings on the projector and reset the lamp timer.. Go to your on screen menu and go to settings.. Good Luck
Power supply
Ebay is a good place to buy those kinds of parts from.
Restting the lamp timer
Hello,
Give Power to projector, press Reset, Left, right,Enter from remote.
Power on the unit and check timer.
Viren
Video will not show
Hello
Pls Check the Video Cable. if it is ok then the card has to be checked for video signals.
Viren
Sony VPL-CS5
you must change the lens. the cost is high. see the sony site for replace the parts.
Sergio
Not finding what you are looking for?