20 Most Recent
Casio HR-100TEPlus Calculator - Page 2 Questions & Answers
How do I get this calculator to substract
Big calculators work a little different than handheld calculators. Like the above commentor explained, if you have a basic "whats 100 minus 20?" You have to entered as 100 + 20 -- And when you hit the minus button at the end, it will give you the total. 100 is the positive number, and the 20 is the negative number that your subtracting. Also you can hit 20 -- 100 + and get the same total because you entering 20 as the negative and 100 as the positive, just in reverse.
8/24/2009 2:25:20 PM •
Casio...
•
Answered
on Aug 24, 2009
Need help w/ink
Hi...This calculator takes a IR-40T ink roll.
Turn off the power.
Open the top cover,
There is a flat tab on the ink roller, lift up, remove.
Hold the new roller by the tab, line it up in the slot and snap in.
Turn on the power and test.
If it doesn't work you might not have it snapped in properly or all the way.
Good Luck........
Squipps
1/29/2009 12:19:56 AM •
Casio...
•
Answered
on Jan 29, 2009
I'm so stupid
- Remove the top gray lid of the calculator
- Insert paper through the back side slot near the power charger
- Turn the calculator on print
- Press FEED a couple times
9/23/2008 5:31:30 PM •
Casio...
•
Answered
on Sep 23, 2008
Loading paper
Its probably worn out. I have been messing with mine and if it does feed it is slipping and overwrites.
5/19/2008 7:37:53 PM •
Casio...
•
Answered
on May 19, 2008
% key is stuck on
use air can from radio shack and use dry cleaning spray while you press the button many times
2/29/2008 2:20:37 PM •
Casio...
•
Answered
on Feb 29, 2008
Casio HR-100TE
The problem of your unit is its printer. Probably the gears has misaligned. Only an authorized technician can align the printer of that unit, because it is a bit difficult to align the gears.
Try to contact the nearest service center of casio in your area.
2/16/2008 6:19:35 AM •
Casio...
•
Answered
on Feb 16, 2008
Cant get the % key turned off.
HI..if this is a printing calculator and the print mode is turned...if there is a problem with the printer and E for Error will appear. The ribbon or some paper could be jammed in the printer..a key could be stuck down..check your entire keyboard key for sticking.
The calculator wont hurt itself and that is why the E is on. Examine it very carefully and look for something caught in it.
If none of the above you might have to get a pro to look at it.
Hope this helps you out....
Squipps
2/7/2008 12:53:32 AM •
Casio...
•
Answered
on Feb 07, 2008
How do i do prime numbers on the NEWYES NY-991MS calculator and CTIFREE fx-991ES PLUS calculator?
The NEWYES NY-991MS and CTIFREE fx-991ES PLUS calculators do not have a dedicated "FACT" button like the Casio FX-83GTX. However, you can still find prime numbers on these calculators.To find prime numbers:NEWYES NY-991MS:Press the "MODE" button.Choose "PRIME" from the list of options.Enter the desired number and press "=" to check if it's prime.CTIFREE fx-991ES PLUS:Press the "MODE" button.Select "TABLE" or "TABLESET."Input a starting point and an ending point, then observe the table for prime numbers.Although the techniques may vary from those used on the Casio FX-83GTX, they prove to be effective for prime number calculations on the designated calculators.
Not finding what you are looking for?