Top 20 Samsung N150 Notebook Questions & Answers

hi try installing the driver first then start the prog,it sounds like it needs the driver. http://org.downloadcenter.samsung.com/downloadfile/ContentsFile.aspx?CDSite=US&CttFileID=3196313&CDCttType=DR&ModelType=C&ModelName=NP-N150-HAV1US&VPath=DR/201009/20100912165036703/Camera_ver.345.2001.4004.3_FW.zip

You have not mentioned the OS name or version. Appears to be display driver issue. See the forum here http://www.sammynetbook.com/forum/threads/13405-N150-unable-to-adjust-Brightness For windows 7 ... Try the version 8.14.10.2108 from Samsung site and apply it (Run As Administrator required) and after a re-boot ]. shoud solve For windows 8 ... follow http://www.eightforums.com/general-support/3281-samsung-n150-cant-change-brightness.html

Dear Ronald Pl. remove the key board connector from the main board and tape it.. Connect the external key board and monitor to its port. That will work. It will better to disconnect the internal display connector. Thanks.

https://www.youtube.com/watch?v=X0CiBXuMVGo

replaced broken slide switch and power knob

faulty adapter or battery fault.

Drivers for notebook Samsung N150 You can download free drivers for notebook Samsung N150/N210/N220. All required drivers for Win 7 are available for download, including drivers for audio, video, chipset, Wi-Fi or usb http://drp.su/drivers/notebooks/?v=Samsung&m=N150/N210/N220&id=428&l=en

is it the bios password or windows login password??

easy download the correct wattsap program to the correct windows or Mc os and this is the solution

c:/windows/win.exe

Press f4 while turning the system on. or press F8 and it will give you the option, "repair your computer" click on that enter password if any and do system recovery. this should solve the problem. Make sure to take back up if you have anything important in the system.

You need to reinstall windows. Start up windows and press the F8 while it starts. You will see "repair my computer" option. Choose this, and that should sort you out

ou can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+f10, it will open the recovery console, select full factory restore and follow onscreen instruction. NOTE: This will erase all the datas on the computer.

just type "win"

Battery is most likely your issue in most cases your best bet would be try taking out the battery and if the system shuts off while it's plugged in chances are it's the power brick.. Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620

Best and easiest, go toWww.ninite.comYou can find the adobe software there and install it easily and without unnecessary crap. Or you can just enter www.adobe.com and click on GET FLASH

There is no any mode for activating the 3G sim by the laptop.Call customer care, he can guide more.

Activate it using the telephone option and do it mannually and when the computer asks how many pc is this software on say only one and if they even ask. its done with interactive automation. no sweat Good luck.

Sorry about that but what you should know is most often antiviruses makes computers slower when installed. they are useful but they also have cons and one of them is the consuming a lot of ram lagging the computer, i suggest if you have 1gb of ram or less please remove that antivirus and get a portable small protective piece of software like COMODO just to protect your system and minimize usage of removable media like flash disks. this will help you alot trust me. for web browsing install browser based apps that can protect you online from viruses like Web Protect for mozira