20 Most Recent Curtis-Mathis CM19011 TV Questions & Answers

Rebecca,
You should only need to connect the red yellow and white wires to the TV. Make sure your TV is set to the aux input/video input. Sometimes this is a channel, sometimes you have to change the video source. There might be a dedicated button on your remote for this. I believe your TV is only standard definition (non HD).
Greg

Check whether volume is set to Zero. If it is found OK, Check the speaker/s. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Refer its user manual for details. To download it, try this link. http://tv.manualsonline.com/manuals/mfg/curtis_mathes/cmc13003.html

is it possible to connect my toshiba regza rv75 tv to the internet

your equation would be x=158.80*M + .025*Nx being your total cost, M being the number of months and N being the number of miles driven.

Check the antenna connections for loose. If it is OK, replace its tuner.

No,all small tvs CRT tubes analoge tvs design under 35" none of the tvs have a digital tuner inside of it tv Tuner signal board.Must get a signal through a Digital Converter box to recieve a free on AIR broadcating channels from a Digital broadcasting signal.Tvs that are analoge CRT tubes design that have a Digital Tuner design inside of it are only some DLP tvs analoge CRT tube design 40" and above have it only.

Its probably something internal. Mostly its cheaper to just buy a new tv maybe off craigs list or something. You can take to a repair guy just look in the phone book and call try to find a private business it will save you time and money.
Please accept solution. We ask you to leave a rating by clicking 1,2,3 or 4 stars and any feedback is appreciated.


Best Reguards, Premium FixYa Support

If you have a Walmart or K-Mart close by, grab one of the All In One remotes. They'll program to control the TV.

I have one of this tv model too.Just used a RCA component cables like Y,R,W hook one side to the tv Video IN INPUT holes and the VCR the other end of the cable to VCR Video OUT INPUT holes.Now just pushes a channel manual button up or down a couples for the tv go into VIDEO Mode.Play the dvd player it will work.Or try Remotes.com to buy a tv original remote.Return the universal remote.

In that case the model of the tv has no importance, all that counts is the type and model of the converter box and the type and profile of the missing channels.
Without knowing more all i can say is that those channels are probably coded in a format your converter box can't or won't support - like when you need to have a special decoder and an decoding card to view them.

Hi oib,
Welcome to FixYa.
My name is John. I will be assisting you with your issue.
You can download a free copy here. www.manualsonline.com .
Thanks for choosing FixYa. Happy Holidays......John

Try these

Curtis Mathes
0047 0466
0016 0054
0060 0093
0145 0030
0154 0451
0166

Please rate my help++++Thanks for using FIXYA

No,all CRT tube tvs don't have digital tuner inside.They're analog tvs.Must buy the converter box,and hook it up to get the free DTV airwave signal.Trust me,i help an elderly person hook up this exact this tv model with a converter box.Try buy the RCA model converter box,it matches with this tv model very well.