Belkin F5D7234-4 Router - Answered Questions & Fixed issues

click here and read my various tips to get a clear idea about your question...

If you need any type of information (technical and non-technical) regarding Belkin Router. You may visit here Belkin Support Belkin Router Support Number 1 800 335 8177 Belkin Help. Here at this link, you will get all your answers regarding Belkin Routers.

There is a stor in Colac that can fix that it is called itec

Here is a link to Teleblend tech support.
http://support.teleblend.com/index.php?_m=downloads&_a=view&parentcategoryid=1

With my VOIP setup @ home, my path is as follows:
Modem -> VOIP Adaptor - phone
|
Ethernet out - router Wan input

Go to http://setuprouter.com/router/belkin/f5d7234-4v5/login.htm and then follow the instructions following: Login to the Belkin F5D7234-4v5 Router and work your way down through the instructions.

MAC (Multimedia Access Control) addresses are unique sets of codes assigned to electronic devices that identify the devices on a network. MAC filters work by either allowing or denying only specific MAC addresses. MAC filters are a great security measure; however, if your network needs to be open to public or guests, or you're adding and removing devices often, then you should consider turning off MAC filtering. Ad

EditMethod One of Three: Wireless Routers (Windows)

1. 1 Open the Command Prompt. You can access it from the Start menu, or by pressing ? Win+R and typing cmd.
2. 2 Type .ipconfig and press? Enter.
3. 3 Find your active network connection.There may be several connections listed in the readout, and you may have to scroll up to find your active connection.
4. 4 Look for the .Default Gatewayentry. This is the address for your router. Write it down.
5. 5 Open a web browser. You can access your router's configuration page from any web browser as long as your computer is connected to the network.
6. 6 Enter the .Default Gateway address into the browser's address bar.
7. 7 Log in with your admin account.Routers are protected with an admin login and password. Check your router's documentation or look up the model online to find the default login information.
   • If you can't figure out how to log in to your router, you can reset it by pressing and holding the Reset button on the back for about 30 seconds. After the router restarts, you will be able to log in with the default admin information.
   • Most default logins use "admin" as the username, and then "admin", "password", or a blank field as the password.
8. 8 Open the "Advanced" section and look for "MAC Filtering", "Access Control", or something similar. Actually defining where the "MAC Filtering" section is located is very difficult, as the location and labeling is different for every router. Generally, you can find the "MAC Filtering" or "Access Control" settings in the "Advanced" section, though it may also be found in the "Security" or "Wireless Settings" sections.
   • Not all routers use MAC address filtering. Some router's limit access based on static IP addresses assigned to each device.
9. 9 Disable MAC filtering. Again, the wording and location will vary depending on the router, but you will generally be able to select a "Disable" option to turn off MAC filtering.
   • This may be a checkbox, a button or a selection that you can make.
10. 10 Save your changes. Click the "Apply" or "Save" button to save your changes to the router settings. Your router will apply the changes, which may take a few moments.
    • If you are configuring your router over a wireless connection, you may be logged out when settings changes are saved.

Access it via its ip address. Google Belkin for their standard username and password and connect via browser to the router -you will need to obtain its ip address. Think it should 192.168.0.1

i want my wi fi number change

Reset the outer here is how

You need to encrypt your wireless router to protect your Internet access fro unauthorized access. Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1 The default PW = blank (just press Enter) You can now change the default admin password. You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Mine has this problem also. Apparently this is related to the voltage circuit. If someone has the schematics or the solution please tell us.

First see if you are able to connect to the internet wired to the router,-If you are able to connect using the wire connection then I suggest to turn off the wireless security settings for the time being and see what happens. WirelessSee if you are able to ping your router.Ref: http://www.wikihow.com/Ping-on-Mac-OS-Make sure that the TCP/IP settings are set to DHCP and make sure that it is getting an IP address and Default Gateway.If you are able to ping the router then see if you are able to ping google by name and by IP. (An IP address for google,com is 74.125.141.100)If you are able to ping both then you should be able to access the internet.If you are able to ping only the google's IP address then you have a DNS issue. -See if you can set your DNS address manualy to 8.8.8.8 and 8.8.4.4. Ref: https://developers.google.com/speed/public-dns/If you are able to ping only google by name then see if you are able to access google by typing in the replied IP address in the address bar of your web browser on a computer that is working fine. -If you are not able to access google with the address then you may have something stooping you on your machine. Check for firewalls and antivirus to see if they have any network configurations.

Dont know reasoning behind this but check under stickers for screws usually behind barcodes with void if removed stickers over the screws.

I think to secure your wireless router,you should set strong password.... Try to reset your router using reset button...it may be solve your problems......

Make sure your ISP modem connects to main RJ45 plug (yellow). Then simply connect PC to any available port. Wireless requires discovery of your network.

To connectyour computer/iPad to a wireless router, you click the Refresh networklist, then Choose your wireless network and then click Connectto your secured Wireless Network, it will asks for a Network Keybefore allowing you to connect into your wireless network. This NetworkKey is either the WEP, or WPA or WPA2 Encryption key that is used toconfigure the Wireless Router. The Passphrase is an alternate way tosetup the Encryption key.When you are requested for a Network Key, you can just enter the Passphrasethat was used to configure the Encryption key in the wireless router.http://www.fixya.com/support/r5270415-network_password_network_addressFor information on securing your wireless network,configuring the wireless router and configuring the wireless card in thelaptop/computer, please click on this link and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

sounds like your wireless may be infected by a virusrun this utility to find outhttp://housecall.trendmicro.com

First, open the routers web configuration utility by opening your browser to 192.168.2.1 (note that this is the router's default IP, so if you changed that, change the IP respectively)once logged in, go to "Security" under "Wireless" and set your wireless security from there.Good luck

the default password is left blank. if that does not work then reset the router back to factory settings hold the reset button in with a paper clip for 30 secondsafter that you can connect to the router with a cat5 cable and reconfigure your router by going to the browser and opening 192.168.2.1

iPhones only support 2.4Ghz (Wireless G not n)