Top 20
D-Link DIR-615 Wireless Router Questions & Answers
How can I find the WPA2 passphrase
Would either have to login into your routers configuration page through an internet browser, or if you have a Mac computer connected to the wifi use the program called Keychain to see saved passwords. Or if you have a windows computer already connected to the wifi you can find it on the wireless properties section of Control Panel. Would need your model # of your router to be more specific.
Disconnect from time to time
Download an app called Wifi Analyzer (by farproc).
It shows the Wi-Fi channels around you and helps you to find a less crowded channel for your wireless router. If there are a number of users with channels near your one, simply switch (using your desktop or laptop) and find a less-crowded channel.
Your manual should show you how to do this. Normally you key in something like ... 192.168.1.1 in your browser bar.
Best of luck
I need to reconfigure my D-LINK wireless router. It is used and I do not have the administration or password.
This is from the 615 manual:
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty.
I've uploaded its manual to the Fixya site. That said both eecom and sargeon give correct answers; however, eecom's answer is very complete. It not only answers the initial question, it answers questions on how to securely setup the wireless router
How can i fix dir 615 ssid stop broadcasting issue?
Step 1: Open your web browser and type in the IP address of the router (192.168.0.1 by default).
Step 2: Enter the username (admin) and password
Step 3: Under Setup Select the Wireless tab
Step 4: On Wireless Tab - Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DIR-615. If Invisible is selected, the SSID of the DIR-615 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DIR-615 in order to connect to it.
How do I find my WEP key for D-link DIR-815
Hi
Reset the router to factory default IP & password with switch / pin hole on back. Use the factory Router IP address & pw to log in to the router using a Browser (Safari, FireFox, Opera, IE, etc) Change settings to whatever you want.
Note: we don't use WEP any more because it's not secure. Use WAP2.
Trevor
Password reset dlink
You would login to the router with a browser and change the passwords you want from in there. If you are not sure what address to sign in to, type in a command prompt iconfig /all notice the number that comes with the default gateway. That is where you sign in.
How to change the security key?
Type routers ip address in the url space where you normally type "www." This will brimg up you routers page log onto it ( all details are on the router) go the security and change the password
Not finding what you are looking for?