20 Most Recent
One For All URC-3300 Remote Control - Page 6 Questions & Answers
I want to progam remote and I lost the manual
Try this as all remote controls work about the same when manual setting.
Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.
1. Turn off the device with which you want to use the remote control.
2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.
3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.
4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.
5. When the device turns on, press OK to store the code.
Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.
Fill free to ask me questions about anything..........................
Need to program my one for all remote to my 13 in. emerson tv
The codes to operate an Emerson TV are: 0019, 0038, 0039, 0154, 0158, 0177, 0178, 0180, 0182, 0183, 0185, 0236, 0270, 0280, 0282 and 0463.
give them a try.
Urc-4330b03 need colds for tv
here's a pdf file of the original manual:
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=oneforall&dv=universalremote&md=urc43304devicebigeasy&kw=&st=&ar=&dt=&so=&pg=2&file=others/one_for_all/urc4330-manual.zip
Need codes
Keep trying these till you hit the correct one.
0062
0004
0009
0135
0189
0183
1141
0227
0456
0008
0068
0075
0141
0161
1.
Press and hold the SETUP
button until the red
indicator stays on, then
release the SETUP button.
2.
Press and release the
desired Mode button (TV,
VCR, etc.). The red
indicator blinks, then
stays lit.
3.
Enter the 4 digit code i've given you
Note:
after a valid code entry,
the red indicator turns off.
For an invalid code, the
red indicator flashes.
4.
With your device on,
press CHANNEL UP. If
the device responds, no
further programming is
required.
Note: If some
buttons do not operate
your device, try one of the
other codes for your
brand.
Hope it works,
Hughie.
Not finding what you are looking for?