20 Most Recent One For All URC-3300 Remote Control - Page 7 Questions & Answers

You can get a new remote from: http://secure.remotes.com/store/tevion/k3288u.html

I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating as thats how we get paid.

This was a tuffy. The code I found was 1023. Good Luck!

After extensive research, this site has the most complete list of universal remote control codes. http://dogbytecomputer.com/codes.htm

1053 0971 1121

manuals and codes for the One For All remotes are at this link http://www.oneforall-na.com/

Please take the time to give this solution a fix ya rating.

clarkco

visit this web site it has the manual and codes:http://www.hifi-remote.com/ofaold/3300pro.html

sorry to trouble you as i did not have one of your controllers , and was looking for a code for my AOC TV, WHICH IN THE END SURFING THE NET STUMBLED ACROSS AN AOC CODE FOR ANOTHER AOC TV ,TRIED IT AND IT WORKED .
THANK YOU.

http://www.hifi-remote.com/ofaold/

http://www.hifi-remote.com/ofaold/ This website has the codes for All of One Remote

The codes are as follows.

0154 / 0156 / 0060 / 1256

You can also click on the link below to do a direct search.

http://www.oneforall-na.com/advanced_search.php?action=dosearch

You can find the codes at this site.
http://www.oneforall-int.com/

http://www.ofausa.com/advanced_search.php

Try this link, enter your info and you should get what you need

You can find the codes at this site.
http://www.oneforall-int.com/

You can find the codes at this site.
http://www.oneforall-int.com/

You can find the codes at this site.
http://www.oneforall-int.com/

i bought a one for all urc 3430 universal remote controle i lost his code can you help me

there is a code for s SANYO ............002 412 506 619 902 i think that will work for you if you need to know how to program it/ just ask
djkb

TV Toshiba 0154 0156 0060 1256PROGRAMMING
TV/VCR COMBO CONTROL
Perform the following instructions to
control a TV/VCR Combo:
1. Turn on the TV/VCR Combo and
insert a video cassette.
NOTE: Please read steps 2-4 completely
before proceeding.Highlight or write down
the codes and device you wish to program
before moving on to step 2.
2. On the remote control,press VCR/DVD.
Press and hold SET until the LED
blinks twice, then release SET.
3. Use the Setup Codes For TV/VCR
Combos (on the back side) to locate
the brand name and then enter the
first four-digit code for your device.
If performed correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice, then
repeat steps 2 through 3 and try entering
the same code again.
4. Aim the remote control at the device
and press POWER once. It should turn
off. If the device does not respond,
repeat steps 2-3, trying each code for
your brand until you find one that
works. If it still does not work, try
Searching For Your Code.
NOTE: If the device does not have a
POWER key, press the (PLAY) key.

hope that helps

0154, 0159 these are the only two I can find. Hope it helps.