20 Most Recent
Toymax Binatone Carrera X350 Car GPS Receiver - Page 7 Questions & Answers
User's manuel in french
Puzzling. Wanted in French or wanted it translated to English? Better yet, which GPS? Try customer service of the manufacturer. Elsewise, you might have to try an online translation site.
3/4/2023 2:23:02 AM •
GPS
•
Answered
on Mar 04, 2023
Binatone U700 7 inch Sat Nav. Software update problem?
Question edited for clarity.
Question moved to model category.
Does it give an option to change the name to 'Bruce GPS'?
Binatone are known for cheap electronics, it's not a Garmin for sure.
Technical Support or contact: If you have a technical problem with your device please contact the helpline on 0844 557 9677 or for more information regarding you product go to
www.binatonetelecom.com
Try resetting the Sat Nav, then reconnect. You will loose saved addresses unless you have backed them up.
System Reset Under extreme circumstances it may be necessary to reboot the system. Reset the system if the following situation occurs: ? Long delay experienced with screen refresh rate or operation, resulting in an inoperable unit. ? The system will not turn Off with the power button. ? No response with selection made on the screen. The reset button can be found on the rear of the unit. Insert the tip of the stylus pen or small blunt implement into the reset hole in order to press the button. The system will be immediately reset.
No one else has had your issue
https://www.google.com/search?q=Binatone+u700+navigation+change+device+name
..
3/2/2023 5:23:55 PM •
GPS
•
Answered
on Mar 02, 2023
Sanyo C9Y4 Language Change
I'm having that problem right now.did you manage to get this rectify
2/18/2023 4:08:30 PM •
GPS
•
Answered
on Feb 18, 2023
I have a new unused
Re: Tronic T4X Battery Charger that is stuck in standby (red LED). Mine does the exact same thing. It was bought at Lidl in Norway when that company was present for a couple of years. I have taken the battery charger apart, but can not find any obvious faults, like blown components, bad soldering, etc. I also wonder why it fails like that. Just now I measured the tactile switch (mode button) with a multimeter, and it seems that it is faulty. 2 pairs is always connected, lets say pins 1 and 3 is always connected and pins 2 and 4 is always connected. No matter if the button is pressed. However pressing the button does not make a connection between the mentioned pairs of pins. There is always a 2,76 MOhm resistance between the pairs, even when the button is pressed. This makes me think that the button is faulty. This is how a tactile switch works: https://www.digikey.com/en/articles/the-basics-of-tactile-switchesEdit: I just soldered a couple of wires from either side of the switch. Then I could power up the charger and make contact between the pins while it was on and showing the red indicator light. I measured 5VDC between the wires and 0VDC when I shorted the wires. The LED did not change at all. The output of the charging leads was 30 mVDC while contact was open, and 10mVDC when the button was "pressed" (wires shorted). Maybe I have to have a battery connected for the charger to start charging/change mode? That will be the next thing to try.
1/8/2023 7:15:32 PM •
GPS
•
Answered
on Jan 08, 2023
I'm having problems registering my device
You have to use Garmin Express to register your unit. Download the program from Garmin and install to your PC. Your PC should auto id the unit. If it does not, download and install the Garmin USB drivers from the Garmin site.
12/5/2022 9:57:19 AM •
GPS
•
Answered
on Dec 05, 2022
Garmin Nuvi GPS Stopped working
Hey everyone I might have the solution:
Just got done "fixing" mine, turns out it didn't need any fixing whatsoever, just an update.
I had the same problem most of you seem to have:
Device: StreetPilot C340 worked great when I bought it and for months until one day, it just doesn't turn on...wtf right?
I was halfway done with tech support for an RMA request, (some of you might still need this) and that's when I noticed the usb input on the side of the device (like most of you I thought, why the hell does it even have one?) I plugged my universal camera usb cord into the pc, (At this point the device was on! and charging too!) and went to the garmin website, feel free to search but you will end up with this page:
http://www8.garmin.com/support/collection.jsp?product=999-99999-27
pretty straight forward after this, follow the step by step depending
on whether you have a mac or pc, download and run the "webupdater" mine
was for windows, so I ran this all the way through and bam your good to
go, you even have the option of updating the voice and language preference after the initial updates.
hope this helped everyone!
11/29/2022 8:02:22 AM •
GPS
•
Answered
on Nov 29, 2022
How to change battery CKS5369A AM FM Alarm clock
What brand name is this clock radio? The serial number you posted covers several different makes of Alarm clock and there are a few different ways companies fit the batteries. Use the comment button below with more information and I'll try to help you more.
11/3/2022 5:15:16 PM •
GPS
•
Answered
on Nov 03, 2022
Not finding what you are looking for?