20 Most Recent Krups GVX2-12 Electric Burr Grinder - Page 8 Questions & Answers

O sensor de temperatura na parte frontal da carca?a da caldeira (atr?s do painel frontal) n?o est? detectando nenhum calor na caldeira. Freq?entemente ? o borne de terminal desconectado do sensor ou o sensor inteiro n?o est? mais preso na caldeira. A solu??o da Krups ? para substituir a caldeira completa, mas no passado, eu revendi o terminal de volta ou colei (com cola resistente ao calor) o sensor de volta para a caldeira.

A common place for a leak under the machine is the barista seal that goes in the bottom of the boiler around that eject rod. Barista seal part number is MS5002202, Seals on the tamping piston are MS5002040 (there can be 1 or 2 of these piston seals) If fixing the leaks does not fix error 6 then I expect it will end up being the distributor. Part number MS2A01500

Did you completely finish the descale process. On the models I'm familiar with you run thru the descale doing every step it requests then refill the tank and run thru the rinsing process until it ends completely. As far as I know there is no reset for errors, the problem needs to be located and fixed. I have no idea what the unplug icon may be indicating.

Probably going to depend on the model, ask another question and include the model number in the subject line to attract maximum attention

Remove the covers, locate the leak and fix it.

The model is necessary information.

First off you tell folks what model it is, then someone familiar with it will be able to help you.

Replace the valve on the distributor or if necessary the whole distributor. While you are at it replace the tamping piston seals and the barista seal.

That info is not supplied via the normal service centre channels. Take it to an Authorised Service Centre and if they have not seen it before they will contact Groupe SEB to find out what needs doing.

Contact the manufacturer by phone, or use the online method to ask for help: If you have a question about a Krups product, please select "Consumer Service" as the theme of your request or contact us at 1-800-526-5377 (Monday to Friday 8:00am to 6:00pm EST) https://www.krupsusa.com/consumer-services/Contact-us

http://www.manuals365.com/swf/krups/ea81-and-ea80.html?page=1#index Maybe in manual, or can contact manufacturer for more assistance.

If it has no water flow check the pump. If it does have water flow then look for a leak or if no leak it's probably the distributor.

www.youtube.com/watch?v=3hqZKm4mH2k You may just need to clean it out. Watch videos.

You need to try much harder to contact them or alternatively return it to the retailer and let it be their problem. Messing about with it yourself can risk voiding the warranty.

Krups do not supply a service manual for this model so you are only going to get information from others who have done repairs on them. The service info only refers to a leak at the pump high pressure exit elbow (you replace it and the high pressure tube) and an overflow leak at the top of the brewing handle (you replace the inner plastic guts of the handle with improved part) The rest is follow your nose to find faults and solutions. You may be better to post your specific problem. I only ever worked on the more expensive models with integrated grinders.

That's probably going to be a big job, Error 10 means that the sensors are not detecting any heating of the boiler. Good luck with that one.

Prosz? o pomoc...mam krupsa EA9000 i wy?wietla mi code:4 , nie wiem jak si? do niego dosta? do ?rodka

I had the same problem with a 8250. I had to throw it out as the grinder stopped accepting oily beans. I suggest that you take all the beans out and take a "keyboard cleaner air can" and spray the heck out of the area where the beans get ground up. It'll spray grounds all over so do it outside!