Hitachi EC12 Portable Electric 2hp Air Compressor, Oil Lubricated "120v motor" Questions

120v 15amp. I believe that it was made by Campbell Hausfeld and is of the oilless single cylinder type. If however your compressor is oil lubed and has a motor /drive belt configuration it may be able

...possible just for motor If the electric motor says 120/240 then yes. It it only says 120 on the data plate then no. I have attached a good read for you. Should you change your motor from 120V to ...

...motor k56a28b23 230v work with 120v? Some motors will work with 120 volt or 240 volt You have to remove the small cover on the end of the motor & see if there is a diagram, where you move the ...

...120v i have a 30 gal 5 hp craftsman compressor that is 240 voltage. i have heard that it may be possile to change it over to 120 volt for usage. i can not locate a manual for it on line for the ...

switchable motor it would say so on the tag. I have an air compressor with a switchable motor and it says 120V/240V on the tag, theres a wire to remove inside the pressure switch to change the voltage

...120v, 15 amp, model 215902 VPK1381509 air compressor that either had no or someone removed, before I got it, the power cord. I cannot find anywhere to connect another one. The on/off pressure switch ...

My goodyear direct drive inflator quit working, it turns on but no air comes out? It turns on but no air comes out. its probably a disposable product but there is a coupler between the motor and pump ...

...motor tag and see if it has 120v/230v. if not you will have to purchase a new motor that will handle 220/230 volts.If your motor will handle 220/230/volts you need to look at the the wiring diagram ...

...motor is 1 phase,3hrspower,120v,induction. You may find a turnbuckle with that thread as they are all made in china now. That will get you the thread , then you will need to fashion something to take ...

...120v wall outlet. Piston and shaft turn freely. Have installed a new pressure switch. Just turned the compressor on and spun the crank shaft and the compressor turned over sluggishly for a second and ...