Onkyo TX-SR606 Receiver "pcm ps3" Questions

PS3 asks me to check which of the following output formats is compatible with the receiver: - Dolby Digital 5.1 Ch. - DTS 5.1 Ch. - AAC - Linear PCM 2 Ch. 44.1 kHz - Linear PCM 2 Ch. 88.2 kHz - Linear

PS3 support DTS 5.1................. " " AAC...................... " " Linear PCM 2 Ch. 44.1 Khz - unchangeable 48 Khz " Linear PCM 7.1 Ch. 44.1 Khz 88.2 176.4 48 96 192 Video is fine as well as other

...PS3 should be PCM for codecs like MP3, AAC,AAC+,mpg,mpeg etc. However, for Dolby Digital/DTS/DD True/DTS HDMA/DTS HDRA new slim PS3 should be raw/bitstream. For old/FAT PS3 there is no option for ...

into it and set audio on ps3 to pcm,this will give you digital surround eg multichannel,if not you must use a optical cable from ps3 to reciver and set ps3 audio to digital. hope this helps. CABLE GUY

...PS3 must be set to PCM 4. set the sound setting on the receiver to the following a. on the remote press AMP button then the MENU button, next press the down arrow to you see 5- AUDIO SET - then press ...

...PCM. Any help is apprecited You might just have a handshaking issue between your PS3 and your receiver. See if there are any firmware upgrades for your PS3, Receiver or both. This usually takes care ...

disc the signal info shows PCM.Shouldn't it show Dolby Digital or True HD? Your PS3 probably has a setting for what digital bitstream it produces. Check it out. Dolby Digital is probably what you want

...your amp,if you still have problems use the optical out on the ps3 as the ps3 does not out put hd master audio or dolby true hd only pcm, you will still get dolby digital. hope this helps. CABLE

...PCM will utilize the PS3's internal digital audio decoding, and I believe output a two channel analogue signal... which your receiver will then reprocess into simulated surround sound... not ideal ...

...PCM, your PS3, when pressing select should show that it is decoding the dolby digital HD. There is no quality difference in the two. PCM is the same because it is un compressed audio. So when using ...