Onkyo TX-SR606 Receiver "standby work" Questions

...standby button doesn't work it won't let the audio play. Very Strange. Any suggestion on fixes? I am experiencing a simular problem; amber light stays on ; no other lighting appears. this occured ...

...work it out what ... on the display panel in standby mode there is small blue light says : hdmi any advice on, how to bring back standby light ..! thanks If Zones are turned on or, if a mobile device ...

...fuse of your receiver. your recever has problem with its power supply stage, that's why there is no standby light also. fist of all check the fuse. then check the standby transformer is it faulty or ...

power works but receiver will not stay on power works but standby light will be on and display goes on but shuts off immediately. standby light just blinks. any solution? thank you The outputs are ...

...whatsoever in hookup. Hi... try factory reset: while holding down VCR/DVR button ,press the ON/STANDBY button. "Clear" will appear on display ,and receiver will enter standby mode.

how to turn off standby mode tuner will not turn on to allow operation of surround sound. The standby button keeps flashing and I cannot find out how to get out of the standby mode. Try this: On the ...

...work normally but after a few seconds goes back to standby. I tried holding down the A& B buttons but still reverts back to stand by Any idea,s Thanks mark Unit is in protect mode there are a few ...

...AVR older receiver but worked fine; now Denon AVR 1804 older receiver but worked fine; now 'on/standby' button is stuck on 'standby' and cuts itself off automatically Did you try to reset the ...

Can't get off Standby mode How do I get turn the standby mode off ? plug out the set and start over if it does not work call a tech to look at your set to verify.good luck.

Pioner VSX-456 The main switch sometimes work, sometime not weak standby power supply. locate those capacitors on the standby power supply .