1993 Toyota Previa "put tensioner pulley" Questions

Ad

...and some you simply put a socket on the tensioner pulley bolt head and move the tensioner arm with a twisting clockwise or counter clockwise motion to take the belt off and to reinstall it. good

Ad

...release tension from belt; remove belt; make sure not to forget how the belt is routed; route belt around all pulleys but tensioner; put tension on tensioner pulley; route belt over tensioner ...

Ad

...pulley.loosen tension pulley to adjust belt. tension. then you put the other belt on power steering pump pulley and crank pulley. adjust belt tension loosen power steering pivot bolt. that

Question about Toyota Previa

1 Answer

...put it all of the pulleys, including the "tensioner" pulley except one that is easy to reach. Then with a wrench or socket handle on the tensioner pulley, push or pull on it making slack in the belt ...

...on until the belt is on every pulley except the tensioner pulley. Again, release tension on the tensioner pulley with the breaker bar, and then put the loop of the belt on that pulley and you're

Question about Toyota Previa

1 Answer

...put on Application:With A/CKia_Sedona_2002-2006Accessory Drive BeltsACCESSORY BELT ROUTINGINSPECTIONREMOVAL & INSTALLATIONPrintAccessory Belt Routing Fig. Accessory serpentine belt routing-3.5L ...

...tensioner pulley to slip the belt on or did you force it on. If you put it on with brute force the chances are that you did real damage to the belt. Check that all the pulleys turn (by hand). Check ...

...put the belt on every pulley except the tensioner pulley. then get the wrench that fits on to the tensioner pulley bolt. push/pull which ever release the tension and slip the belt on that pulley. the ...

Question about Toyota Previa

1 Answer

tensioner put new tensioner in place and tight bolt. second remove bolt from idler pulley discard old pulley put inton place and tighen bolt. next install belt fallow belt routing digram put head of 3

put it in neutral this sounds goes off Pls any one knows the reason check your crank pulley,possible the rubber which is used on it cracked and on loading the ac knocks,or check the tensioner  of

Not finding what you are looking for?
1993 Toyota Previa Logo

336 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...