2004 Hyundai Santa Fe "anti brake spray" Questions

Ad

brake anti-squeal spray to the backing plate of the outer brake pad. Another thing to consider, is to switch the pads out with ceramic pads. They last longer, are quiet, and don't create as much brake

Ad

brake pads put on about 5,000 miles ago so I don't think that is the issue. when they put the new pads on they should have sprayed them with permatex anti sqeal a lot of techs are lazy and the dont do

Ad

...of the pad or on the face of the pad that touches the brake rotor. The anti-squeal stuff goes on the back of the pad, not the face. IF he sprayed the face, it may wear off. It may require new

Question about Hyundai Santa Fe

1 Answer

...You'll need a large c-clamp or brake caliper piston tool (available at parts store) to push the piston back into the caliper. Spray some anti squeal compound on the back of the pads and

...brake pads. I have ABS do I have to do something before I do the work? 2003 Pontiac Sunfire No, just be sure you block the wheels and have the brakes on...Just spray your braking system with cleaner ...

Question about Hyundai Santa Fe

1 Answer

...sprayed them with brake cleaner, (ABS safe). I dont know if this relates but i didnt experience this with my old gear. Did you install the brake pad spring anti rattle clips? Many leave this

...seated correctly-check rotors might be glazed over or need to be cut and if u didn't apply anti squeal gel or spray to the brake pads goes on back and sides where metal to metal meet not pad to ...

...brake pads. Personally, I would take it back to the shop that did the job and make them fix it. New pads should not rattle. It would seem as though the anti rattle plates have been omitted when the ...

Question about Cars & Trucks

1 Answer

brake after a long drive especially when its hot. whats seem to be the problem Pedals are touching/moving an electrical connector. Locate connector. Disconnect and spray with anti-corrde lubricant and

Anti lock brakes and traction control are operated off of the axles, they will have ridges or splines on them for the sensors to read. They get rusty or brake dust on them. You need to wire brush them

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

2,414 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...