1993 Saturn SL2 "loose power steering pulley tighten" Questions

Ad

...power steering pump...you don't need to take it out, just move it out of the way. You will need to take the wheel off of the passager side and take off the plastic covers, take the belt off and the ...

Ad

...loose fitting. Place the power steering pump pulley on the power steering pump shaft and install Power Steering Pump Pulley Replacer T91P-3A733-A. The small diameter threads on the tool should be ...

Ad

Question about Saturn SL2

1 Answer

...the new power steering fluid. I no i gave you directions on how to remove the whole power steering pump question is the pully loose or are you wanting to just change a belt good luck happy ...

...your belt is slipping Your belt is loose or your power steering fluid level is low. My 2006 Grand Vitara did the same thing about a week ago. My son tightened the belt and it has been fine since

...loose, and when extra power is required, such as in a tight turn, then it slips and stops providing power assistance. Poke the belt with a finger to see if it loose, and tighten it accordingly. These ...

Question about Saturn SL2

1 Answer

...power steering works 100% of the time and does not make as loud of a noise or as often. What is the issue? Loose belt-tighten or worn idler pulley bearings.Tighten belts first and if the squeel is ...

...power steering belt to replace the alternator belt with the new one ADJUSTMENT Excessive belt tension will cause damage to the alternator and water pump pulley bearings, while, on the other hand, ...

power steering pump support bracket isn't loose) The diagram for the belt is usually under the hood. make you sure are using the right serpentine belt, or looking for another little bit belt , and the

power steering pump for a 1998 Toyota Corolla? I have a loose pulley and I'm wondering if I have a bad pump, pulley, or just need to re-tighten it? It is most likely the shaft is bad and a new pump is

...loose how do I replace or tighten You need to pull out the timing cover. 4-6 hours of work. Here is the step to remove the Cover, then you need to remove the Sprockets. Remove the oil pan. Remove the ...

Not finding what you are looking for?
1993 Saturn SL2 Logo

676 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Saturn SL2
1992 Saturn SL2

145 Questions

1991 Saturn SL2
1991 Saturn SL2

35 Questions

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...