1996 Honda Odyssey "manifold" Questions

I need the torque values for exhaust manifold to head nuts and exhaust manifold to exhaust pipe nuts. Car is a 1996 Odyssey. The exhaust maniifold to head nuts are 23 ft lbs. The manifold to exhaust ...

...is it? bank 2 is closest to the front sensor 1 is the heated oxygen sensor(HO2S) in the exhaust manifold before the cat converter I'M GUESSING THAT U HAVE A SIX CYL. THE BANK REFERS TO THE

exhaust manifold has a leak planning on drive exhaust manifold has a leak planning on drive down to georgia from connecticut 1,000 mile one way.. should i replace manifold?? can i run into problems ...

I want to replace the manifold on my 1996 Honda Odyssey, I need instructions on how to do it. it shouldent be all that difficult, first u need to drain the coolant from your engine, then undo the ...

...pressure in the intake but i would look more at an air flow meter or o2 sensor map stands for manifold absolute pressure tells the ecm what the manifold is doing along with other feedback ...

...the LONGFT value exceeded the calibrated lean limit value Possible Causes: Air leaks in intake manifold, exhaust pipes or exhaust manifold One or more injectors restricted or pressure regulator ...

...idle control, but the 1129 may be the cause of the 0505. I would say that you have a bad bad map-manifold absolute pressure sensor. Good luck and contact if you need more help. thanks for using

...it cost Get a can of carb cleaner and spray it on the vaccuum connections and around the intake manifold. When you notice a change of rpms, you have found the

increase idle speed try cleaning the idle control motor its on the inlet manifold engine side of the butterfly ,other than that i would really need my head under the bonnet to sort it out

...causes could include: Faulty fuse or fuses, faulty wiring and/or Connector(s) from/to Intake Manifold Flap Motor or a faulty Intake Manifold Flap Motor. Your possible solutions could include: ...