1998 Cadillac DeVille "torque upper engine mount 98" Questions

...Torque to 160 inch lbs. (18 Nm) Radiator upper hose Radiator upper support crossmember Negative cable Fill cooling system with coolant. Hi, the most recent manual I have for that body style is a '98 ...

Torque Specs Belhousing to engine bolts28-38 ft/lbs Camshaft sprocket bolt40-45 ft/lbs Camshaft thrust plate to engine block bolts108-144 in/lbs Crankshaft pulley to vibration damper bolts35-50 ft/lbs

...torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable 3.5L Engines Remove or disconnect the following: Negative battery cable Air ...

torque sequence for 2002 nissan altima 2.5L engine So 80 degrees is approx. how many ft lbs. 2.5L Engine Before servicing the vehicle, refer to the Precautions Section. Drain cooling system and engine

upper engine area, below center fuel injectors, mounted in cylinder head.  To replace: Disconnect the knock sensor wiring connector.  Then, unscrew the sensor.  Remove the knock sensor.

...upper timing belt covers in that order. Tightening torque:5.8~8.0 Ib-ft (7.9~10.7 N·m, 0.8~1.1 kg-m) 14. Install timing belt guide plate and crankshaft pulley. Tightening torque:9.0~12.6 lb-ft ...

...Torque the center bolt to 87 ft. lbs. (118 Nm) and the 4 side bolts to 17 ft. lbs. (23 Nm). If removed, install the right side under cover. Lower the vehicle. Install the 4 upper timing belt cover ...

...torque converter housing Starter Motor Remove/Install4. While supporting the starter motor with one hand, use the other hand to remove the upper mounting screw from the starter motor.5. Slide the ...

...upper timing belt covers in that order. Tightening torque: 5.8 - 8.0 ft. lbs. (7.9 - 10.7 Nm, 0.8 - 1.1 kg-m) 14. Install timing belt guide plate and crankshaft pulley. Tightening torque: 9.0 - 12.6 ...

...torque. Removal 1. Set # 1 piston at TDC on its compression stroke. 2. Remove the spark plug wires. 1995 Nissan-Datsun 200SX L4-1597cc 1.6L DOHC MFI (GA16DE) Page 2 3. Remove the rocker cover (see ...