code 39 on 93 jeep cherokee Do you have auto tranny? Check code number again do not have a 39 code but do have a 37 code and a 41 code
...93 grand cherokee came up with 12 and 47 Code 12 is Battery voltage to PCM disconnected within last 50 key-on cycles. So it's not a problem.Code 47 is Battery under voltage. Probable ...
Question about Jeep Grand Cherokee
93 jeep Cherokee start stall problem error codes 22 and 24 Won't start hot, wait 20 minutes and it starts Code 22 Coolant sensor signal out of range - May have been disconnected to set timing ...
Question about Jeep Grand Cherokee
...93' when I run over a few bumps in the street, it stops the engine my 1996 jeep grand cherokee lmtd. won't start did tune up. cranks but no fire. please help. engine code 54 shows up . cam shaft ...
93 grand cherokee runs poorly, check flickers on and off , computer code 53 Code 53 is an internal PCM (engine computer) failure and will require the PCM to be replaced. A rare problem to have, ...
...93 Jeep grand cherokee only starts when the check engine light comes on. What could the problem be? When the check engine lights turn on, I suggtes scabbed the PCM to know excatly what fault code in ...
code removall The 93 Grand Cherokee does not have an auto shutdown security code. To shut down the factory security, you have to unlock the rear tailgate lock cylinder with your key. If the jeep shuts
...93 jeep the instruction say to ground the positive battery cable to the negative cable ignition off remove pos. and negative battery terminlas hold both cables do not touch the battery both cables ...
...V8 5.2L starts but only while pressing on the gas pedal stays on once I let off it dies run fault codes and check for MAF/MAP and VAF sensor ...
...rough starting, how, do you find the power codes, ? or reset, the computor ?. just has no
2,181 questions posted
Usually answered in minutes!
3,350 Questions
3,279 Questions
2,899 Questions
2,715 Questions
2,521 Questions