1989 Jeep Wrangler "slave cylinder problems" Questions

Ad

Question about Jeep Wrangler

1 Answer

...slave cylinder came apart. the push rod came right out of the cylinder. does this mean my clutch is warn causing the rod to exceed out of the cylinder? Hello, the answer is not necessarily, you have ...

Ad

Question about Jeep Wrangler

1 Answer

slave cylinder, now grinds My clutch pedle suddenly went to the floor. I was told to replace my slave cylinder, after several problems, I finally got it in, and it didn't pop out... Now the problem is

Ad

slave cylinder but i continue to have problems after my jeep sets for awhile, the transmission will not go into gear, if i pump the pedal about 30 times it will shift great while i'm driving..........

Question about Jeep Wrangler

1 Answer

...slave cylinder or faulty clutch master cylinder unless you have oil on the clutch plate causing it to stick or a dry or seizing spigot bearing in the flywheel( possible ), there is no report from you ...

...slave cylinder inside the bellhousing?? hi sounds from the clear symptoms you have described that the actual slave cylinder/clutch release bearing assy inside clutch housing is leaking unfortunately ...

...cylinder and slave or a problem with the clutch assembly itself? Any help would be appreciated. Hi Bruce I advise you to check the flexible hose first, if its ok, so the problem is the master/slave ...

Question about Jeep Wrangler

1 Answer

...cylinder. And can a slave or master cylinder work some times ok and then not work ? Cheers Bob Vancouver BC Canada Yes the clutch is the problem, master and slave should always be replaced

...slave cylinder on the bellhousing.  Open the bleed valve and have someone push the clutch pedal slowly to floor, and hold. Close the bleed valve, and repeat until fluid comes out in a steady ...

...OR REMOVED THE SYSTEM HAS A CLUTCH MASTER CYLINDER @ FIREWALL AND A SLAVE CYLINDER @ TRANS THAT WORS THE THROW-OUT OR RELEASE BEARING IF COMING OUT COVER ON TRANS THIS WOULD MOST LIELY BE THE ...

...cylinder to the slave valve or the slave valve. you are talking about the slave unit i believe it may be leaking under the dash remove mats on drivers side and also lift carpeting look above the ...

Not finding what you are looking for?
Cars & Trucks Logo

461 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...