2000 Jeep Wrangler "4 engine" Questions

...Clockwise Fig. 2: 1992-95 2.5L engine Engine Firing Order: 1-3-4-2 Distributor Rotation: Clockwise Fig. 3: 4.0L and 4.2L engine Engine Firing Order: 1-5-3-6-2-4 Distributor Rotation: ...

4 cylindeer/engine light is on 4 cylinder/engine light is on what may be th problem thanks can be any thing ,check to make sure gas cap is tight . disconect battery to reset

4 cylinder, then it's just a 4 cylinder engine)-----YOU didn't say if this was moving or stationary, but another possiblity is the driveshaft is out of balance, tires, or an engine in need of a tuneup

...engine 1998 wrangler 4 cyl 110,000 miles. The engine will not start immediately on the first couple of cranks, On the second attempt it starts every time. Is this a fuel pressure problem? quite ...

4 2 for the four. The distributor rotation is clockwise. To find Top dead center (for wire to cylinder #1 on distributor), look for and line up the timing marks on the crankshaft (front of the engine)

...engine 2. transmission 3. power steering 4. brakes 1. regular anti-freeze with 50/50 water mix for coolant 2. oil is 10W-30 regular or synthetic 3. brake fluid: DOT 3 OR 4 4. automatic transmission ...

...and starter pulls can vary by engine. as can A/C options and others. 2.5 L AMC 150 I4 Complete engine specs[show] 4.0 L AMC 242 I6 Complete engine specs[4][show] 4.2 L AMC 258 I6 Complete engine ...

4 and there is no change in engine running. Really running rough at idle but seems to run fine on acceleration. Can anyone help? check the injectors and make sure there is fire on those plugs in 3 and

.fixed the problem Check the Vac, seloind on the front axel I have a 1995 YJ 2.5 litr engine. The 4 WD works sporadically. Once it engages it is strong, the problem is that it engages when it wants to

...unit on the 4.2L engine. 1987-90 vehicles equipped with a 2.5L engine, incorporate the coil in the control module." seem you have this. says wiki. 4.2 L AMC straight-6 engine, 358cu/in.