1995 Dodge Ram 2500 "ignition coil problems 94" Questions

Ad

Question about Dodge Ram 2500

1 Answer

...ignition. Further test revealed that there was no voltage at the coil. Tested with meter with engine turning over. No voltage. Where do I start. Is there an ignition relay ? If so where is it? I have ...

Ad

...ignition coil, and you should try replacing the ignition coil and the ignition module both together, and be sure to clean out the distributor mounting suface, and be very certain that you do ...

Ad

Question about Dodge Ram 2500

1 Answer

...coil and ignition coil in distributor w/ ohm meter...since you already replace the ignitor, then mostly likely it's the pickup coil or ignition coil...buy the whole  distributor (~130$ comes w/ ...

...in ignition coils? I had a 94 XJ6 - given the amount of wiring in the dash and under the hood, you may need a dealer for this.The first thing I would look at is all of the ground

Question about Dodge Ram 2500

1 Answer

...coil with the ignition ON. If possible test the coil by using the HV output directly to a spark plug (one of the old ones) - then ground the other terminal. (make sure you have both contacts) You ...

Question about Dodge Ram 2500

2 Answers

...ignition coil. Still no spark. Should I replace ECM or Distributer. sounds like the Ignition Control Module is bad, it's in the dist. I had the same problem with my honda my d4 is blinking also from ...

Question about Dodge Ram 2500

1 Answer

...ignition coil . I've changed the coil, checked the distributer cap, but no power is getting to the coil, everything appears to be connected properly. What am I missing? Is there an ignition module or ...

I have a 94 jetta and it don't have any spark to the plugs or it seams the computer is not correctly working. common problem is ignition coil/ igniter unit fails. try replacing this unit.

Question about Dodge Ram 2500

1 Answer

...94 4runner,while i was driving the motor quit, found out it's not getting any spark,i have checked the coil and igniter pack ohm's resistance and are within spec's. I've checked all fuse-able ...

...ignition coil, or fuel system. Something is wrong @ the auto shutdown relay. I thought it was the PCM, but replaced it and it'[s not. A it's not sending power to the coil and the fuel ...

Not finding what you are looking for?
Cars & Trucks Logo

335 questions posted

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...