1993 Buick Regal "tools needed remove steering" Questions

...tools, a new pump, fluids, etc.2) Remove the leaking pump-- Instructable step 2 - Drain the Power Steering system-- Instructable step 3 - Remove accessories from Power Steering system-- Instructable ...

...needed to remove the power steering pulley or the pulley that is next to the steering pump? ...

...remove the steering wheel (need steering wheel puller. remove lock plate (need lock plate removal tool) under the lock plate is the switch it kind of looks like a horse shoe with many wires going to ...

...needed.... Looks like a large heavy u-shaped steel bracket with a screw in center. You must remove nut from pit arm bolt, install tool and turn big center screw to apply pressure to yoke on gear box. ...

key switch stuck n on position how to remove old key and switch to replace with new one remove steer wheel with puller. u will see black cover remove 3 tork screws.remove. next u will need a special ...

of trim plate sides pry loose(no tools needed)work towards middle.lower steering wheel pull plate out.4 size 7mm screws hold panel in.press clip top left of panel loosen connector reverse to reinstall

...Remove the stoplamp switch-to-steering column bracket retaining pin. Unplug the electrical connector. Push the switch arm to the left and towards the cowl to disconnect switch-to-pedal arm. Release ...

TIMMING PROBLEMS ON SMALL BLOCK 350 CHEVY got a question,i brought my motor to top dead center on compression stroke the mark on the ballancer pointed to zero also i dropped in distributor pointing at

94 buick regal grand sport i have a 94 buick regal grand sport, keeps stalling, was told to replace computer, did not work, was told to replace coil pack, ran for a few ( 2 ) days and now it will ...

special tool to pull calls power steering puller YOU NEED A PULLEY REMOVER TO REMOVE PULLEY FROM POWER STEERING PUMP.YOU NEED A PULLEY INSTALLATION TOOL TO PRESS PULLEY BACK ON THE POWER STEERING PUMP