2002 GMC Sierra C/K1500 "need" Questions

Need to replace pitman arm on 1989 k1500 5.7 do i need to remove or loosen gear box No. You just need a pitman arm puller and the correct wrenches.

...3-4 days without starting the truck.Fuse will snap- or there is no indication of problem,what do i need to do next?Truck is a 93 g m c suburban Do you need the lighter? if you don't need, just cut ...

need to replace the water pump on a 1992 gmc pick-up need diagram of how to replace do I need to pull the fan cluch and radiator to get to it??? hi,first off you have to remove the acc. drive belts, ...

I need to know the amount of refrigerant oil to put in new air cond. system on a 1993 GMC pick-up, v-6., standard trans. Hello barksdale fr: My name is Roger and I will help you. The amount of a/c oil

need to know what the factory speaker sizes for my... Need to know what the factory speaker sizes for my 1990 gmc k1500 the correct speaker size is 4x6 front and rear the fronts are simple be careful ...

...is an earth wire between the engine and the body (usually bolted to the exhaust manifold), you need to undo it from the body, and with a piece of sandpaper or a file, you need to clear away the ...

how do i replace the oil pressure lines in my 1992 hmc sierra k1500 truck all you need is wrenches that are made for special fittings such as the ones on these lines. they are called flare nut ...

Need to change ignition switch on 1993 gmc 1/2 ton truck You will need a wheel puller.. Makes life much easier for pulling the stearing wheel off.. The wheel puller comes in various shapes and sizes ...

...think? Check the gears of the transmission and checked the release bearing. If the release bearing needs to be change replace it.And make sure to buy a new transmission fluid.If you need ...

tapping sound when starting or shutting off the engine Sounds of low oil pressure or oil need changed to thin. Either you need an oil pump or your engine is old and you need to rebuilt it. See the ...