1997 GMC Yukon "replacing spider gears rear end" Questions

Ad

Question about GMC Yukon

1 Answer

...all the way in there will be a c clip on the end of the axle pull that out and remove the axle.Be carefull not to let the spider gears fall out you can put them back but can be a pain.. Hope this ...

Ad

...rear end as it has two shafts running from spider gear to spider gear, I think they have to come out first to get at the clips on the end of the axle shafts, can you help? they come out the same way ...

Ad

...spider gears busted in the rear end! Nissan will not release any info on it and will only sell the entire rear end when all I need is the spider gears! In the mean time having a problem getting the ...

...Spider gears are not difficult to replace...however, if they are worn, usually this contaminates the lube and can cause damage to carrier as well as pinion bearings...Those require precise settings ...

SPIDER GEARS HAVE BROKEN IN REAR AXLE 2001 CHEVY TAHOE, REAR END WAS MAKING NOISE FOR A WHILE TOOK IT TO THE MECHANIC TOLD HIM TO CHECK THE WHOLE TRUCK ALL HE FIXED WAS THE FRONT END REAR END WAS ...

...spider gear pin in my rear end has come loose! i need to replace th rear end but dont wish to replace with th same year. i would like to go older since these rear ends have a bolt hold this pin in ...

...if broken you will need to drill a tiny hole into it and remove with tiny "easy out" or other similar device.Do not turn carrier when shaft has been removed or spider gears will rotate and fall

Question about GMC Yukon

1 Answer

...and now every time I make a turn it sounds like the rear wheels are sliping on the pavement(very loud) I have a 4 wheel drive . Axles are not moving independently. Spider gear locked up in rear

Question about GMC Yukon

1 Answer

...spider gears are binding 2). the ring gear is binding on the pinion Check the pinion gear bolt for tightness first, then check for excessive end play. Make sure you have the correct fluid for your ...

...spider gears these connect to drive shafts.check all suspension ,engine ,gearbox mountings. I would say its the spider gears in the rear. You can pull off the Rear housing cover pretty easily and ...

Not finding what you are looking for?
1997 GMC Yukon Logo

373 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

593 Questions

2004 GMC Yukon
2004 GMC Yukon

524 Questions

2001 GMC Yukon
2001 GMC Yukon

309 Questions

2007 GMC Yukon
2007 GMC Yukon

326 Questions

1996 GMC Yukon
1996 GMC Yukon

238 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...