Question about Dodge Cars & Trucks
...rear end and need info on moving brake lines and hoses from old axle to new axle Held on by a bolt and two clips. Bend the clips and remove the bolt. Just be prepared to replace them if they are ...
...rear axle seal and bearing for 97 ford explorer Replacing wheel bearing and seal on rear axle and when removing pinion shaft pinion gears fell out. Not sure how to put them back, it seems a s-spring ...
Question about Cars & Trucks
...rear-main-seal-leaking.html---------Differential Chatters? http://whatisbyme.blogspot.in/2012/04/1996-toyota-prado-differential-chatters.html---------4x4 front differential will not engage the axle? ...
Question about GMC Yukon
...replace pinion seal and axle tube seals on 97 jeep cherokee 4x4 4.0 ? rear diff part number is ms3760a old posts. i doing them so others can see there are free docs. no need to guess. this is in the ...
...rear bearings go out if you do a lot of towing with the truck. Cost about $ 400.00 to replace make sure they replace the ABS sensor collar and replace the axle breather tube vent ( they get plugged ...
...replace rear axel wheel bearings on 97 ford explored what special tools are needed for this job You will need an internal bearing puller. You will have to remove the rear axle by pulling off the ...
...ir drums Rear wheel drive or 4 wheel drive could be the axle seal is worn down and leaking into your drum/disc If the car is front wheel drive then the caliper or the wheel brake cylinder is ...
...Replace, do not reuse any seals. You may also need to reprogram the trucks shift points for the new gear ratio to maximize efficiency results. Note: By changing your gear ratio to 3:73 You may ...
...Rear Brake Discs Replace the bearing and race as a single set. automotive roller bearing. image by Tom Oliveira from Fotolia.com Before raising the rear of your Honda, remove the dust cup from the ...
replace u joints on 97 gmc sanoma truck Chock the wheels. Undo the bolts near the rear axle housing. You may have to pry the driveshaft back towards the transmission, Pull the drive shaft. Use a large
373 questions posted
Usually answered in minutes!
593 Questions
524 Questions
309 Questions
326 Questions
238 Questions