1997 GMC Yukon "put rear end gears" Questions

Ad

rear end, You will see it fall out. Then just pull the axel out. When you put the axel back in, push it all the way in then slide the c-clip over the end of the axel and then pull out on axel and that

Ad

Question about GMC Yukon

1 Answer

...rear tire the ring gear will turn,look for a bolt head on the spider gear housing pull out that bolt/pin and then push axle all the way in there will be a c clip on the end of the axle pull that out ...

Ad

...put it in gear and can hear it while driving is it the rear end or universal joint Check rear-end fluid level and play in rear pinion gear. Check universal joints for play. If play is in pinion gear ...

Question about GMC Yukon

1 Answer

...put gear oil is in the "pumpkin". Otherwise called the rear-end. To do so, I recommend driving the car backwards onto two ramps to raise the rear end up in the air, this also tilts the car forward. ...

Question about GMC Yukon

1 Answer

rear end clunking the rubber mounted bracket in the middle of of the rear end differential seems to be the problem...what is it called? If it is a rear wheel drive vehicle I would check the U joint ...

...put all new bearings in the rear end thinking the rear end was the problem but it still does it.I put it in four high and it didnt do it. It has 200,000 miles on it and needs an alignment and tires . ...

...rear of explorer. You know when you put it in gear it is like thump when you pull off it will click It sound like u might have a bad u joint or a worn out gear in your rear end call rack n pion also ...

Question about GMC Yukon

1 Answer

rear end noise and seizing now i had a rear wheel seal leaking i replaced it when axle was out rear differential was removed also as the lock bolt broke off now after new seal and lock bolt and ...

...rear end was bad so i put anothr one in it and now when i put it in 4wd it drags to rear tires and i checked the gears and they are the same 373 gear ratio as what was in it what is wrong WELL IF YOU ...

Question about GMC Yukon

1 Answer

...also when stopping fast. Also when put in gear the rear end will shift up or down. I would start by replacing U-Joints. They are really common issues when it comes to clunking noises. I'd start

Not finding what you are looking for?
1997 GMC Yukon Logo

373 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

593 Questions

2004 GMC Yukon
2004 GMC Yukon

524 Questions

2001 GMC Yukon
2001 GMC Yukon

309 Questions

2007 GMC Yukon
2007 GMC Yukon

326 Questions

1996 GMC Yukon
1996 GMC Yukon

238 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...