...tools, and starter itself. Yuck!) 4) remove the bolt on the lower portion of the support strut for the intact manifold, so the support strut can be gently moved slightly to the side to provide ...
...tools are needed to remove splash shield, flywheel cover, and starter on a 1997 buick riviera 3.8l engine 10mm on shield. 13mm on starter cable (sumtimes a 15mm) 8mm on starter wire, 15mm on starter ...
...tools do i need to remove and repkace a starter on a 1997 saturn sl2 Starters are generally held in place with two large bolts and possible a secondary bracket. There will be a cable on a large bolt ...
...need any special tools. no special tools needed use a 1/2 inch or a 9/16 wrench for bolts but rule # 1 before you work on any electrical parts on your truck is to disconnect the negative terminal on ...
...remove bolts that go through bottom of starter in to engine block lower starter place on bench disconnect power cable between starter and solenoid then two bolts that hold solenoid to starter replace ...
...need Very simple job to do for the DIY mechanic, best way to get at the starter is from underneath the car, disconnect the live battery terminal, very important! remove the wiring harness from the ...
...need to remove the transmission which can be difficult without the proper tools and equipment. Ideally you want to do it on a lift and you want to have a transmision jack and maybe another set of ...
tools to work around taht exhaust system! good luck & the link is for the same generation vehicle Lincolns OnLine Tech Tips and Articles and another answer that specifies what a PITA it is! How do
...remove the drive shaft. this you will need a special tool must auto parts store will have or can get it for you. Then support the motor from the top. remove the shifting linkage, remove the starter, ...
1,007 questions posted
Usually answered in minutes!
798 Questions
716 Questions
570 Questions
508 Questions
442 Questions