1987 Nissan 300ZX "87 truck ignition coil" Questions

Ad

87 olds delta 88 3.8 could some one explain how spark plug to coil wires go i know the firing order but how does that corrulate to how the wires go firing order is 1-6-5-4-3-2 1987 Oldsmobile Delta 88

Ad

where is the ignition control module located on an 87 oldsmobile delta 88 royale brougham, and what does it look like? It is under the ignition coil. The coil is bolted to it.

Ad

Question about Nissan 300ZX

1 Answer

...ignition coil connector to pin 87 in the ASD relay socket. If this is not a low resistance, repair the wire. TERMINAL LEGEND NUMBER IDENTIFICATION 30 Common Feed 85 Coil Ground 86 Coil Battery 87 ...

Question about Nissan 300ZX

1 Answer

...87 nissan pathfinder v6, run good then cut off. start then cut off. now won't start at all.put new wires,core,gass filter,cheked fire,gass,fuil pump.fuil relay,in swich. don't know what to do. don't ...

87 is carbureted with electronic ignition your going to run into more hurdles than just the starter and coil.however the starter you can wire the cellinoid to the ignition and just run a power lead to

...ignition system malfunction (#1 coil/igniter circuit fault) P1305 = same as above but #2 coil P1310 = #3 coil P1315 = #4 coil turn on the A/C and the compressor coil will not pull in. Jump out 30 and ...

ignition on. Power at ASD Pin 86. power to Pin #3 at computer. Fuel pump works On the ASD relay, what are the other pin numbers? Is it 85, 86, 87, & 30? If so, usually pins 87 and 30 are the power

Question about Nissan 300ZX

1 Answer

87 mustang with 302 engine, turns over but will not fire. Have changed coil and coil wire. What could be the problem? ignition module or fuse/relay, possibly switch. Check for voltage at coil terminal

...ignition control module? it connected right next to the coil on a 87 nissan maxima,,,( with two little screws that are screwed to to coil...it has two wire connectors on both ends...one from the car ...

87 prelude wont start it has no fire from the coil an i replaced the coil an it still wont fire what could be my problem check to see if the wiring harness connecting to the plug is not corroded. also

Not finding what you are looking for?
Cars & Trucks Logo

237 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...