2000 Chevrolet Tahoe "truck wont stay closed chevy" Questions

...wont stay flowing out of injectors. Already put a new fuel pump. did you install the oil pressure switch origional to the tahoe? The tahoe uses a low oil pressure shutdown, instead of an inertia ...

...wont stay closed Hello Matthew, Check the hinge on the door and the retainer latch button inside of the filler neck area. Sometimes they stick and won't pop out back out to keep the fuel door ...

...chevy tahoe and I jumper cable it to start and I drive it all day but the following day it wont start so I hve to jump start it again. It has a new battery and I got the alternator checked and it was ...

...wont my sunroof for my 2012 chevy impala stay closed? It will open and even close but then it pops back open to the vent position. you may have a bent rail or something my be an the track not letting ...

...wont stay on 2003 chevy malibu revs up and down for no reason close to 2500 rpm in idle. once operating temp is reached it shuts off. it can be restarted with no problem at times for a few minutes. ...

wont stay wants to push lever back 66 nova len2664: check for a bent control cable or door which is binding due to corrosion. The binding can be taken care of with WD-40. alot of times there is leaves

...there is an air bubble trapped in behind the thermostat your thermostat wont open and your car will heat up and stay hot while letting a small amount of coolant through the bypass so it wont ...

...wont shut off while at work with truck shut off and keys out, my parking lights came on and wouldn't shut off. had to pull fuse to prevent battery drain. Now it does it every time I shut truck off. ...

...wont stay shut. it keeps poppin back open. every once and a while it will shut Get a can of a spray lubricant such as WD-40 or Rust Check and spray inside the latch. Move the can around so that the ...

...wont shut or stay shut how do i fix this? the handle and linkage needs to be greased , unscrew the plate on the inside of the tailgate, so you can see the handle ,spray with penetrating oil , keep ...