...engine block, but do not tighten.Using a torque wrench on the tensioner pulley apply 250 inch lbs. (28 Nm) of tighten to the tensioner pulley.With torque being applied to the tensioner pulley, move ...
...engine, rotor should be under No. 1 terminal.Install distributor hold-down washers and nuts. Torque to 9 ft-lbs . Install spark plug cable bracket. Install two harness connectors to distributor. ...
...Torque settings for Crankshaft & Cylinder Hrad Hi I have a Opel Corsa utility 1.7D I am doing the hole engine over but I need the setting for it 2000modle Corsa and the engineers are rebuilding the ...
Question about Ford Cars & Trucks
torque settings. Ford Workshop Service and Repair Manuals > Transit ... Workshop Manuals https://workshop-manuals.com > engine > page_1261 Stage 2: Tighten an additional 90 degrees (one-fourth turn
...engine must be cold). Install components in reverse order of removal. Fit cranckshaft pully. Tighten crankshaft pully bolts 8. G4-J: Tightening torque: 12-15Nm. G4-N/G4-k: Tightening torque: 10-12Nm ...
...engine mount through bolt and torque it to 87 ft. lbs. (118 Nm) Upper radiator support crossmember Torque strut bracket Upper torque strut A/C lines and pressure switch Exhaust system to the manifold ...
Question about Hyundai Cars & Trucks
...Torque Sequence Fig. Main bearing torque sequence-2.4L engine Fig. Main bearing torque sequence-2.5L engine Fig. Main bearing torque sequence-3.3L engine Fig. Main bearing torque sequence-4.0L ...
...the RH front wheel. Tightening torque :88.3 ~ 98.1N.m (9.0 ~ 10.0kgf.m, 65.1 ~ 72.3lb-ft) 19.Install the engine cover with bolts. Tightening torque :3.9 ~ 5.9N.m (0.4 ~ 0.6kgf.m, 2.9 ~
...Engine mounting and bracket. Timing belt upper cover [1]. 3. 4. Turn crankshaft clockwise to TDC on No.1 cylinder. Ensure timing marks aligned [2] & [3]. Remove: Crankshaft pulley bolt [4]. ...
...torque engine mount. 3 right side upper engine torque axis to front cover nuts and the 2 mount to midrail bracket nuts, allowing the powertrain to rest on the block of wood Drive belt, tensioner and ...
436 questions posted
Usually answered in minutes!
1,417 Questions
1,121 Questions
924 Questions
772 Questions
621 Questions