2005 GMC Yukon "blend actuator" Questions

Ad

...blend door actuator on a 2005 gmc yukon need illustration of how to replace blend door actuator Actually you can repair them I did mine it was switching to hot on its own I would have to shut the car ...

Ad

...blend door actuator. The blend door is a device inside the dash that directs the air flow to the desired vent. Sometimes they will fail, but usually is an actuator. Unfortunately, you will have to ...

Ad

...blend door actuator? How do you fix the driver side air blend door actuator on a 2003 Yukon? I believe this might be my problem...SOMETIMES the air blowing out of the driver's side vents is hot. By ...

...blend door and or the electric actuator that moves it. The dealer can do a test scan to confirm this, the repair is very expensive if the blend door is the cause and it has burnt out the actuator ...

...blend air door failing to operate. These are controlled by vacuum on most systems, so you could have a vacuum leak to that door actuator, or a bad actuator. he bad news is, these devices are usually ...

...blend door actuator? Should I start with that or the rear ac expansion valve? I have read that it could be many things. Is there one that would be more likely than the others??? To check the rear ...

Question about GMC Yukon

1 Answer

blend door Actuator is not working correctly. It seems like it is over travels and gets stuck or something. Tried to reset it by removing the HVAC fuse. Bought new actuator. started to worked normally

Question about GMC Yukon

1 Answer

...on floor i cannot get the heat to come out on the floor no matter what position the switch is in. comes out on defrost only is this the blend door not moving. and will new actuator fix it.

...door. The Vacuum Motor may be bad, or the vacuum connection to it may be faulty, causing it to malfunction, as well. The symptoms you describe sound like the actuator for the blend door may be

Question about GMC Yukon

1 Answer

...in the radiator, radiator hoses, coolant reservoir, low coolant, even a bad coolant reservoir cap could cause it. Also water pump is a possibility. If not those, could be a bad blend door

Not finding what you are looking for?
2005 GMC Yukon Logo

412 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1999 GMC Yukon
1999 GMC Yukon

593 Questions

2004 GMC Yukon
2004 GMC Yukon

524 Questions

2001 GMC Yukon
2001 GMC Yukon

309 Questions

2007 GMC Yukon
2007 GMC Yukon

326 Questions

1996 GMC Yukon
1996 GMC Yukon

238 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...