2008 Jeep Wrangler "change shifter cable chrysler" Questions

...shifter that controls 4 high 4 low and 2 high just limply moved about. I limped my jeep to a service station and had it towed to the nearest dealer. It's a 2008 wrangler unlimited 4 door rubicon with ...

... Change the shift cable (cable from shifter to transmission) Also spray some WD40 on the shift linkage on the trans and work it back and forth to loosen it up before you put the new cable on. Good ...

...to the point where if feels like its going to break when im changing the gears Sounds like the shifter cable is corroded to the point that it might snap. Replace the shifter cable. Best wishes to

...Change the shift cable (cable from shifter to transmission) Also spray some WD40 on the shift linkage on the trans and work it back and forth to loosen it up before you put the new cable on. Good ...

...change the shifter cable? Have the EXACT same problem. 2005 Pt Cruiser w about 88,000 miles. Became hard to shift when cold and then bam ....something broke. Moves freely. I know I'm going to get ...

...change the entire shifter assembly? Hi Robert, I'm glad to help! Robert on Chrysler vehicles. Sometimes its not the power or ground or even the release solenoid. Most of the time its the mechanical ...

...shifter cable changed on my 1998 Intrepid ES, which had never seen snow or ice (I'm from Ontario), as all winters were spent in Florida. Besides changing the cable, the interlock has to be adjusted, ...

...My shifter at first was totally disconnected and rode around with the console out so I could push the cable back on when it would slip off the shifter. I found this website to help me change it

...shift cable and the select lever on the Transaxle do not line up. How do I adjust the shift cable. I have already made the max adjustment to the cable at the shifter in the car. replace cable if ...

Gear shift stuck in drive I changed the shifter it still isnt changing cable or linkage,..