Jenn-Air 30 in. Expressions CCGX2420 Gas Cooktop "replacing down draft replace" Questions

the switch you need to remove the top by taking off only the top row of screws all around the unit and also at the top of the down draft cavity (the down draft cavity is where the grease guard mesh is

...Replacing the switch fixed the problem (you can get replacement parts at Searspartsdirect.com - search using the cooktop model number). You first need to remove the unit from its installation. Start ...

...down draft feature in the centre 1) turn off power at the breaker. 2) remove hold down screws 3) pop up cooktop out of counter top 4) remove knobs and downdraft grille 5) remove ceramic top (screws ...

...down draft. I just used my new Jenn Air smooth cook top stove with down draft and there is a mark on one of the burners. I have tried to wipe it off with a wet dish cloth but it wil not come off. I ...

...Replacing the switch fixed the problem (you can get replacement parts at Searspartsdirect.com - search using the cooktop model number). You first need to remove the unit from its installation. Start ...

I have replaced the ignitor on my Jenn-Air down draft cooktop. The ignitor clicks very slowly and only ignites the gas after there is a buildup of gas. The igniter tips need to be adjusted close

...out from under the cooktop would be nice. I just wouldn't go permenant. The fact that you have to tape the down draft to the external vent should keep the cooktop in one place (plus its own

down draft in my kitchen island. Installation was fairly straight forward, as I was replacing an older Jenn Air downdraft. Three wires to connect, black, white and ground and things seemed to be good.

down draft, approx. 20 years old. Need model No. so can order replacement for cooking elements. I have serial no. of 39060759, but nothing will match online. Would No. 2100W fit this older model? Help

...Replacing the switch fixed the problem (you can get replacement parts at Searspartsdirect.com - search using the cooktop model number). To get at the switch you need to remove the top by taking off ...