Jenn-Air JED8430 Electric Cooktop "replace burner element" Questions

Ad

Question about Jenn-Air Cooktops

1 Answer

...burner element has visible blades that fit into the receptacle block, pinch the block with one hand, and pull the heating element free with your other hand. If the terminal block clamps over the ...

Ad

replace it. Check the switch relay: The switch relay is another component that can cause the burner to not work. Check the switch relay for any signs of damage, and test it with a multimeter to see if

Ad

...Replace it and you should be fine. If it is too expensive to fix just disconnect the wires to the burner where they attach to the control . Then you can use the remaining burners. I really don't know ...

...get the burner to function as a large-size burner. The model # is: JBP78W Y1WW. The serial # is: MS246249G. The outer ring of the element is most likely broken. You'll need to replace the

burner doesn't heat. Other burners are fine. Electric cooktop. Sounds as Element has DIED ,New element needed 1. Be sure the heating element is fully plugged in. 2. Replace the heating element. If you

...come on or heat up. The power is on but the front burner wont heat up. All other burners work fine. Is it the switch or the element that needs replacing? could be either, but usually it is the ...

Question about Cooktops

1 Answer

...burner will not work. Is the element gone or could there be another part related to to R/F burner that could be the problem. If it is the element, can it be replaced or is the complete stovetop junk? ...

Question about Jenn-Air Cooktops

1 Answer

...burner control element and I still have the same problem. I am looking for HELP! did you replace the limiter the long rod that goes across the element or just the element everything i can find says ...

Question about Kenmore Cooktops

1 Answer

burner stopped working. How would i replace the electric element these elements merely unplug when you lift up the one side of the element,then just easily rock back and forth till it unplugs from the

...burner to plug into. Could it be the ceramic element the burners connect to at the back of the burner unit? The smaller burner appears to work fine. Based on the symptoms described, it is possible ...

Not finding what you are looking for?
Jenn-Air JED8430 Electric Cooktop Logo

356 questions posted

Ask a Question

Usually answered in minutes!

Top Jenn-Air Cooktops Experts

Paul Carew

Level 3 Expert

3808 Answers

Paul Bade

Level 3 Expert

1818 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Jenn-Air Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...