Jenn-Air JED8430 Electric Cooktop "knob not turn" Questions

...working ones which made no difference so problem is not the actual knob. The knob used to turn very easily but has become very hard to turn also. pull knob off and wd 40 the post that holds the ...

...turn more so the burner stays lit and to control flame but the knob will not turn let off the knob pressure a bit to see if you can then turn the knob call a gas fitter as gas is not in the DIY ...

Knobs will not turn at all.....not to ignite or at all I bought the cook top used and the contractors installed it in my new house, but the knobs wont turn at all.....no matter how hard or soft or ...

...knob does not turn One of the control knobs in our Simpson EZISET cook top was hard to turn . I took out the knob to see what is happening. It looks like the stem does not come up when I pull it.The ...

...turn on gas. Thanks for the help. they must be bent....look around the knob make sure you have an equal amount of space betwween knob and stove...if not, try to carefully bend it until the knob ...

...knob does not turn One of the control knobs in our GE countertop (JGP 336) stopped turning today. I took out the knob to see what is happening. It looks like the stem does not go down when I push it. ...

...noise. Repeated turning on and off it will eventually start There is usually a switch under the knob thaat controls the electrical sparker. OFTEN these get messed up when the area around the knob ...

knob on my KitchenAid electric cooktop will not turn right or left; therefore, I am unable to turn on my top right burner. Turn off the power to the appliance. Squirt WD40 liberally all round the knob

Element on ceramic Frigidaire Gallery cooktop won't go off. Turned off knob and inner circle burner keeps coming on so had to cut power off to range top. Is the problem the knob or element? When I ...

...turn RF knob to "spark" and simultaneously turn on RR burner. The unit is 3 yrs old and the RR burner has always been a little "touchy" when lighting. Only in the last week has it totally stopped ...