Technics SL-1200MK2 Turntable "arm skating records" Questions

...skating is pulling hard enough on the arm that clicking the cue sends the arm to mid record. I have turned down the anti-skating and that gets me mid record, in its normal setting it goes straight to ...

arm isnt skating properly? if so, how do you fix that? Hi the pennies will mess up the stylus. There should be an anti skate setting at the back of the turn table, a round adjustable bit with numbers,

when turntable is turned on (new at-lp2D-usb turntable, just assembled). Increase the weight of the arm, check if it has anti-skate control

...arm and a separate anti skating dial on the base of the turntable? Regards - Rainer The weight should be set to the position recomended by the cartridge maker. Typically 1.5 to 2.5. If you don't know ...

Need to know what settings the anti-skate and the counterwieght on the back of the tone arm should be set to. Also when pressing start tonearm will not move at all. Can still cue it manually ...

...arm skating across the record surface on any turntable is normally due to the counter balance weight being incorrectly adjusted. In order to track across a record properly, the stylus must press down ...

...skating control adds an outward pull to the arm to compensate for the inward pull exerted on the arm when a record is being played. Setting the anti-skating control to "0" should virtually eliminate ...

...Check the tracking and anti-skating forces. If they are out of whack the tone arm can do all kinds of things . . . and make sure you are using the correct setting ( RTFB or try a search engine

skatinig The arm skates across the record when it's placed down. You need to adjust the downward force by adjusting the counter weight which is on the back of the tone arm. Rotate it so it's closer to

...Arm Skating There is no tone arm adjustment, I just got it today and it played like a charm. Tried it again just now and the tone arm just skates to the centre and will not play any record. All ...