Technics SL-1200MK2 Turntable "voltage 1210 switch" Questions

...1210 mk2 turntable is giving me problems...ok first thing is the pitch control really causes the deck to go super fast in places and the pop up light is constantly on even when down..also when i move ...

...1210 has a voltage switch under the platter to the left a little hole for which a flat head screwdriver is needed to switch the voltage. If you live in the UK or outside od the USA it should be on ...

...1210 mk2 turntables pop up light is constantly on even when down,the on/off red light and the pop up light both seem to flicker slightly when i push the start/stop button and also when i move the ...

...voltage switch over underneath the turntable plate One of my turntables target light was pulsing, so STUPID me did what I read on someones comment that the voltage should be switched to 110 V instead ...

...1210 turntable and it sounds like everything I play is out of tune, but I have the picth on normal play for a 331/3 (factory standard). The vocals and bass sound OK, but all the high notes sound ...

...switch is blinking slightly when the table is turned on. I can hear how the sound of the record is being affected at the same time the light blinks. I have a CD tuntable hooked up to the same power ...

...1210 mk2. The turntable speed has started to osolate. This happens at any speed. Do you have any ideas??? First and foremost, are you located in the U.S.? If so, make sure your unit's voltage is set ...

...voltage. The 1210's worked fine then when i used a plug pin adapter and plugged it into the mains. I then had a turntable desk made for my turntables and decided to replace the plug end of the 1210 ...

...1210 M5G. Your power transformer blew. The fuses in these models don't offer much protection, when it comes to more serious power surges. And the only other thing that would be blown is the ...